ASUS Striker II Extreme

[neo mike]

Here Trigger try these settings, should be very close to working, and gets you pretty solid. I find it hard to believe that he is running 4 gigs at 1800mgz with only 1.42, very hard to believe. I know on my 2 gig kit 2000mgz linked, if i drop down one notch in nbv, it will not run period, i cant get my 2000mgz linked without at least 1.54 1.56 nbv.

CPU Level Up = Auto
Memory Level Up = Auto
AI Overclock Tuner = Manual
CPU Multiplier = 8.5
FSB - Memory Clock Mode = Linked
FSB - Memory Ratio = Synch
FSB (QDR) MHz = 1900
MEM (DDR) MHz = 1900
LDT Frequency = 5x
PCIE Bus Slot 1 & 2 MHz = 100
PCIE Bus Slot 3 MHz = 100
SPP<->MCP Ref Clock, MHz = 201.5
SLI-Ready Memory = Disabled

Memory Timing Setting
P1 = Enabled
P2 = Enabled
tCL ( CAS Latency ) = 8
tRCD = 8
tRP = 8
tRAS = 21
Command Per Clock (CMD) = 1t
tRRD = 7
tRC = 50-57
tWR = 12
tWTR = auto
tFAW = auto
tRD = 10
tRTP = auto
tRFC = 110
tREF = 7.8uS

Over Voltage
CPU Voltage = 1.35v
Loadline Calibration = Enabled
CPU PLL Voltage = 1.56 1.60/()
CPU VTT voltage =1.32-1.36
Memory Voltage = 1.94 2.00
NB Core Voltage = 1.52 1.56

SB Core Voltage = 1.50v 1.55
CPU GTL REF0 Ratio = Auto
CPU GTL REF1 Ratio = Auto
CPU GTL REF2 Ratio = Auto
CPU GTL REF3 Ratio = Auto
NB GTL REF Ratio = +30 ?
DDR3 CHA1 Ref Volt = Auto
DDR3 CHB1 Ref Volt = Auto
DDR3 CHA2 Ref Volt = Auto
DDR3 CHB2 Ref Volt = Auto

CPU Configuration
CPU Internal Thermal Control = Enabled
Limit CPUID MaxVal = Disabled
Enhanced C1 (C1E) = Disabled
Execute Disable Bit = Enabled
Virtualization Technology = Disabled
Enhanced Intel SpeedStep(tm) Tech. = Disabled while tweaking/Enable after stable
CPU Core 2 = Enabled
CPU Core 3 = Enabled
CPU Core 4 = Enabled

Spread Spectrum Control
CPU Spread Spectrum = Disabled
PCIE Spread Spectrum = Disabled
MCP PCIE Spread Spectrum = Disabled
SATA Spread Spectrum = Disabled
LDT Spread Spectrum = Disabled