Quote Originally Posted by Cibic View Post
Luck is not enough, DDR3 is sensitive to votlages, 2 memtest86+ passes is not enough, leave it overnight or at least 6-12 loopss to check for any errors. To be honest I think you should try booting with 1.36v in bios (on load 1.30 -1.31) and run small FFT's in prime95. If it's unstable it should BSOD you immediately.
I'll run memtest all day tomorrow then, as I'm in uni all day .

I set Vcore to 1.361v. Its been running Prime95 for 10 minutes with no problems so far. Vcore drops to 1.376 according to cpu-z v1.50.

As for my VDIMM now, I set 1.5v in BIOS. Everest reports 1.58/59v.

What should I do now? vcore seems a lot higher than what it should be yes?