Quote Originally Posted by cstkl1 View Post
on a 920,r2e

if i can run 2000mhz CL8 fine with no errors at qpi 1.48( set 1.53750),dram 1.65v,bclk 200 and also tested the xmp profile also
which was 1.6v for qpi set 143 something for bclk
all dram voltage at 1.65v
pumped dram to 1.67 also no luck.

is there other settings for a latency other than dram voltage??

Did you tried 78720 with lower ram frequency? Try 900-950mhz, it didn't stress the IMC too much. I use 1.44v for the qpi/dram for DDR2000 on my 965 and 1.52v for my 920, don't forget to let the TRFC setting to auto.