How to set up GTL Ref Values for 45nm & 65nm

[keithallenlaw]

Thanks gentlemen. Very insightful. I'm actually thinking "leave well enough alone" where I'm at, which is basically my sig settings below.

vCore =1.356
pLL = 1.590
vTT = 1.378
vNB = 1.55
vdram=1.90 (kingston 2x2 hyper X 1600MHz @1350MHz 7-7-7-21

GTL ref. +50/+50/+50/+50 with NB ref. +40

LLC=enabled

These settings pass an Intel Burn @max load for 10 rounds with the cores reaching upper 60's Celsius.

My current 3DMarkVantage:



Maybe I need to offset cores 1 and 3 from 0 and 2.

My max stable on this build was 460x9 but I wasn't comfortable with the high voltages and upper 70's Celsius core temps with IBT.
But that test is rigid and doesn't apply to gaming. I truly expected a better bench and 3D score on H2O. I gave up and settled on a
24/7 set-up.

Thanks guys! -keith