Retail Q9650 Overclocking Thread

[deachus]

Good to know. The reason I ask is because I was running -5C ambient last night 4500Mhz @ 1.44v. I wanted to gauge how much more I have to up the vCore to get 4800Mhz - 5000Mhz. I hope I don't need that much but we will see. I see alot of people using LLC but I do not use it and my droop is practically nothing with it off. 1.440v set in Bios 1.432v CPUZ Next everything is going in my A/C Chiller -30C

These settings are the max I have run at my highest achieved FSB

4500Mhz @ 1.44v
vTT 1.40v
GTL 0.68/0.69v
PLL 1.58v
vDimm 2.00v
Performance Level 7
Clock Twister Stronger
DDR3-1584 - 6-6-6-18-2T-60


What was your ambient/surface temps at that run?

[TheGanG]

Good to know. The reason I ask is because I was running -5C ambient last night 4500Mhz @ 1.44v. I wanted to gauge how much more I have to up the vCore to get 4800Mhz - 5000Mhz. I hope I don't need that much but we will see. I see alot of people using LLC but I do not use it and my droop is practically nothing with it off. 1.440v set in Bios 1.432v CPUZ Next everything is going in my A/C Chiller -30C

These settings are the max I have run at my highest achieved FSB

4500Mhz @ 1.44v
vTT 1.40v
GTL 0.68/0.69v
PLL 1.58v
vDimm 2.00v
Performance Level 7
Clock Twister Stronger
DDR3-1584 - 6-6-6-18-2T-60


What was your ambient/surface temps at that run?

Load was -38°C, idle about -58°C. Ambient doesn't play a role with my setup. Actually i don't need so high VCore...

PL:8 may be good for you. I believe u hit 4.7-4.8 GHz if u have a good CPU I haven't a good one...

[Hoss331]

Good to know. The reason I ask is because I was running -5C ambient last night 4500Mhz @ 1.44v. I wanted to gauge how much more I have to up the vCore to get 4800Mhz - 5000Mhz. I hope I don't need that much but we will see.

Maybe this will help, for 4.8-4.9 I use about 1.48 volts on air, S1283.

[TheGanG]

Yeah good job friend, i haven't a good chip so it wants fire.
Another reason is DFi LP DK P45-T2RS PLUS (with rev. A2 chipset), big headache with Quads

[deachus]

"Hoss331" can we see some Memset shots with that run. What divider, speed, timings, voltage, PL? Thanks.

[Hoss331]

"Hoss331" can we see some Memset shots with that run. What divider, speed, timings, voltage, PL? Thanks.

I dont remember the exact settings for those runs but here is a quick one for you. Nothing fancy.