Foxconn Bloodrage-Quantum Force- -X58- -Retail-

[BenchZowner]

Yeah jooney is wright , if my multiplayer should stay @ x21 i should hit the 4.5GHz and get me a fine 3D06 score
the problem is that i have to use 1.55V to get is bench stable , no worry on the themps doh , i use extreme watercooling + airco
see my screenschot plzz

I benched at 215x21 yesterday with the i7 920 and the BloodRage with the G13 BIOS and everything worked just fine.
I was pumping 1.57V through the 920 and the 21x multi stayed there all the time ( CPU Full Load temp ~55C ).

By the way there is a...

New "stable" ( P series ) BIOS from Foxconn.
Click here to download the P04 BIOS for the Foxconn BloodRage

[systemviper]

Woot, Nice run BZ, rockign that Bloodrage~

[M.I.K.E.Y]

I benched at 215x21 yesterday with the i7 920 and the BloodRage with the G13 BIOS and everything worked just fine.
I was pumping 1.57V through the 920 and the 21x multi stayed there all the time ( CPU Full Load temp ~55C ).

By the way there is a...

New "stable" ( P series ) BIOS from Foxconn.
Click here to download the P04 BIOS for the Foxconn BloodRage

testing new Po4 bios, all looks fine @ first sight and the multiplayer stays on x21 now
GOOD JOB and right on time

[jooney]

Thats not true!
Same problem with P04,option for TDP TDC still missing.

Idle:



Load:



Edit: Sleep Mode is working

[BenchZowner]

Thats not true!
Same problem with P04,option for TDP TDC still missing.

Man you are not paying attention.
I already told you that the option isn't there for you to see, and it's preset ( set by the BIOS automatically ) to "disabled" ( unlimited W/A ).

Can we have your CoreTemp temps on idle & full load using the same settings as above ?

Turbo is working just fine for both my CPUs with the G13 BIOS, and the same applies to the P04 BIOS.

[jooney]

But why we cant see it?

Here are Temps with 21x191,there are not so high that the CPU must throttle.

Idle:



Load:

[BenchZowner]

You can't see it because it's set like that ( to not be shown ) [ you don't need to do anything regarding the TDP Limits ]
It looks like the situation with the Core Temperatures is like the VID, they seem to be CPU-dependent ( each CPU has its own limits, hopefully not hard-coded ) and dynamically set by the PPM in the CPU.

Can you turn on your AC or open the window to get your temps down and see if it happens at lower temps as well ?

[jooney]

Dont know why but here with lower Temps,i7 easily runs over 80° stable and without throtteling.
DFI,Asus,GB can disable the TDP limit,so Foxconn can do it also,hopefully.

[BenchZowner]

Dont know why but here with lower Temps,i7 easily runs over 80° stable and without throtteling.

Do you read my posts or just quote me and say what you want to say ?

The Turbo Mode is controlled by the PPM and the PPM drops the multiplier if the temps exceed a specific limit ( which is different for each CPU ).
It doesn't matter if your CPU runs stable with Turbo Mode disabled at 90C @ 4GHz.
With Turbo On, after a specific CPU Core temperature the multiplier will be dropped down by the PPM.

DFI,Asus,GB can disable the TDP limit,so Foxconn can do it also,hopefully.

Foxconn HAS IT DISABLED man.
You don't have to disable it manually, it IS ALREADY disabled.

[BrokeDown]

Any news as to when this board will be available for sale again?

[jooney]

I had 6 Core i7 with high und low VID and everyone runs always on 21 with the GB Extreme.

With stock BCLK and a VCore @1,568 everything is fine

[BenchZowner]

<== gives up

[jooney]

Jo say that the multiplier drops if the temps exceed a specific limit.

Less heat,multiplier drops:



Much more heat,multiplier did not drop:



I think the multiplier drops when you set a VCore above...?

[BenchZowner]

Jo say that the multiplier drops if the temps exceed a specific limit.

Less heat,multiplier drops:

...

Much more heat,multiplier did not drop:

Using the same CPU on the same motherboard ?

I think the multiplier drops when you set a VCore above...?

I repeat.
I've used up to 1.6V, and the multiplier stayed put at 21x.

[Solarfall]

I had 6 Core i7 with high und low VID and everyone runs always on 21 with the GB Extreme.

With stock BCLK and a VCore @1,568 everything is fine

lol isn't that a bit excessive volts for so low clock speeds ? hah i used those kinds of volts while i was cooling my core i7 920 with cascade

[jooney]

Yes i only have the Bloodrage and this i7 here.

Did you also use a 920?

@Solarfall Its only to show the problem

[Dinho Fatal1ty®]

Foxconn BloodRage by BR-OCTeam















Bonanza mark conquered in air for a Fox (not vi in no place above of 219 of BCLK in air)



BR-OCTeam
Rbuass/Fabi/Madeira/Nuccini/Ziebart
Sbuass/Dinho/Jackson/MonteCristo


Made In BRAZIL!

[]s

[Envy]

i n s a n e vcore here Quantum force pawa no need to struggle to preserve the future of our planet we need new nuclear power plants.

mamamia

[Envy]

Hello Guys,

i`v just resive mine some hour ago from Alternate.be, ordered / paid at 02.12.

So it wanna say hello to it`s brothers, together with Watercool HeatKiller 3.0 witch i let black nickel.



Just awesome

beautiful

[systemviper]

Foxconn BloodRage by BR-OCTeam



Bonanza mark conquered in air for a Fox (not vi in no place above of 219 of BCLK in air)



BR-OCTeam
Rbuass/Fabi/Madeira/Nuccini/Ziebart
Sbuass/Dinho/Jackson/MonteCristo


Made In BRAZIL!

[]s

Fantastic numberrs...



What was your CPU VTT (uncore voltage) for that run,

[systemviper]

Bloodrage and the IGLOO

.

[jooney]

8 Threads

[MikeMK]

Hey all, just setup my bloodrage + 920, all is good apart from one issue ive come across so far. If I switch off the PC when its POSTing, or just after post (i.e. before windows load) then I cant get it to post again without switching the PSU off for 10 secs and then on again. It just hangs at POST with error code 05. Any ideas? running the P04 bios BenchZowner just posted!

[BenchZowner]

Try the G13 BIOS or the G19a and let us know if it happens with those BIOSes as well.

[Touge180SX]

Try the G13 BIOS or the G19a and let us know if it happens with those BIOSes as well.

Bench, what do you think of the P04 BIOS?