Air Cooled Gallery

**Loser777** · 02-20-2009, 12:04 AM

I only have an old pic (no camera) right now, it looks the same now except for BallistiX that replaced the Samsungs...

**cabbspapp** · 02-20-2009, 12:49 AM

It's because of all the wires in front of/under your graphics card. 900's aren't very cable-management friendly when they're unmodded, especially when you don't have a modular PSU. Are the three exhaust fans really necessary?

Little update, some cable management in the lower section. Need to get my tripod piece back from my friend.

**Etihtsarom** · 02-20-2009, 03:09 AM

Originally Posted by Loser777

I only have an old pic (no camera) right now, it looks the same now except for BallistiX that replaced the Samsungs...

What in God's name is with the 3 fans on the back?
Yikes.

**Mabyboi** · 02-20-2009, 04:16 AM

Originally Posted by cabbspapp

That wire management looks pretty slick.

How's the Enermax fans? I haven't seen anyone else with them before.

I swear by the enermax fans, 120mm fans, 1800 rpm, 70CFM and only 18db. i love them and would recommend em to anyone

**w4rl0ck.!** · 02-20-2009, 09:04 AM

here its mine

Just bought my new xigmatek DK its looks and works really good

**Mabyboi** · 02-20-2009, 01:34 PM

nice warlock, its nice to see more spedo's out there, dont think of that in a gay way

**fatguy1992** · 02-20-2009, 08:19 PM

I just broke a fan blade off one of Scythe Ultra Kaze 3000rpms

I had it on my IFX-14 and the fan wasn't starting up. I restarted a bunch of times and it still didn't start, so I took it off and up it on top of my Antec 1200, i didn't unplug it cause the plug was on the cable management side of my pc and i'm lazy. So I left it plugged in and sat it on top of my case. The when I started the pc back up, guess what the **** fan started this time and it hit the my case and broke a blade off

Is it normally for a fan blade to break that easy?

**cabbspapp** · 02-20-2009, 09:10 PM

If it's a 3K Ultra Kaze it wouldn't surprise me. The plastic they use for fans is really stiff and brittle. I broke the 200MM fan on my old 900 when I accidentally stuck my thumb into it.

**fatguy1992** · 02-20-2009, 11:03 PM

I forgot to mention it was on a fan controller and was running at 1600RPM.

Also my Delta fan hit my case a while ago @ 4600rpm and it only made little chips on 3 blades.

**cabbspapp** · 02-21-2009, 12:49 AM

Well different companies, different plastic. Just try to keep things away from the blades

Still didn't get my tripod piece back, but w/e.

**Marin** · 02-21-2009, 08:24 AM

What fans?

**cabbspapp** · 02-21-2009, 08:13 PM

Mine? The two front intake and CPU are low-speed Yates, rear exhaust is a S-Flex 49CFM, and up top I have two Silverstone FN122's. In the lower section I have a 30 CFM Scythe fan that looks like a S-Flex, but has a sleeve bearing. Exhaust is two Thermaltake 80MM fans that I removed the LED's from.

**Tommy_Hewitt** · 02-22-2009, 05:09 AM

**Kopi** · 02-22-2009, 09:53 AM

Nice clean rig, you must have a pretty good camera or awesome lighting too cause those pictures came out great.

I've posted this picture before but I have no new ones and I wanna post again

:p

**Jodiuh** · 02-22-2009, 02:55 PM

3 SFLEX 1200 RPM in the front
3 SFLEX 1200 RPM in the middle
2 Arctic 1500 RPM in the rear (these things push serious air)

I ran out of black zip ties.

A look from the rear.

Close up shot of the HDD suspension bike tubes.

It's not super quiet, but it's consistent. Most of the noise's from the Arctic fans pushing God knows how much air around.

The raptor's aren't half as annoying as when I used the old Stacker HDD module though.

**reHceK** · 02-22-2009, 03:29 PM

2 "Tommy_Hewitt" : new AMD build ???? =)

**IKIKUINTHENUTZ** · 02-22-2009, 04:01 PM

Nice image tommy but one question

Was there any room inside the case to hide/route the 24pin besides making it in front of image across the side of the 5.25 & 3.25 inch bays?

on a side note:
So how's the GPU cooling round up going for silenthardware.de?

**r0ss0s** · 02-23-2009, 06:06 AM

Tommy Hewitt Which is your motherboard?

**Marin** · 02-23-2009, 07:25 AM

nvm

**IKIKUINTHENUTZ** · 02-23-2009, 09:24 PM

/me learning how to use wrapping paper as a background w/ help with Mr. grey card

WAHH!! I will miss him

he is being sold off

**Ar3s** · 02-24-2009, 02:53 PM

switched from the tj-09 to a tj-10

**Ming@s** · 02-24-2009, 03:47 PM

**Han$en** · 02-24-2009, 05:19 PM

Not the best sight in this threat, but it's a little old two..

I got a pair of ram, and 2x 4870X2's since the picture, but the mess is still the same.. I'll get it cleaned nice 'n' tidy very soon

**|\|EW|3** · 02-24-2009, 05:46 PM

god i need a dang new comp.

**Houdini** · 02-25-2009, 01:10 AM

When I scroll through these pages I always get jealous like hell. I got a CM Stacker 830, which is a case with great potential. But mine is so

ing ugly.

If you guys should buy a new big tower, around the stacker in size, what would you choose?

Stacker 832 and CM HAF 832 are looking sweet - your ideas?

Thread: Air Cooled Gallery

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions