updated guide to 1.39375vgpu max
before attempting any vcore mod please measure your current vcore
courtesy: CryptiK
red:vgpu/green:vmem
step #1
- for better understanding please check dengyongs post #80 cryptiks post #112 and #118
- simple way to increase vcore from 1.15v reference
1.26vcore @ load
step #2
- the lower the resistance at this resistor the higher the vcore allowed
- pencil this resistor to bring resistance down to around 350ohm
1.29-1.33vcore @ load
step #3
- this step is more for the water/more xtreme cooling
- this point increases vcore according to the resistor in above pic ^
- solder a 150ohm resistor to ground from this red point
1.36vcore @ load
2.20vmem @ load
so far ive gotten 1.38vcore
unfortuanately no matter how low the resistance gets @ step #2
all is limited to the reference voltage: 1.39375
past this voltage further mods are needed
thanks goes to Cryptik for all the help/confirmations
dengyong and everyone else contributing @ thread







Reply With Quote
Bookmarks