Foxconn Bloodrage-Quantum Force- -X58- -Retail-

[BenchZowner]

Hi you all bloodlovers ,

as this is the most active post for the bloodrage , i thought i try to post my bizzare mem problem here ik the hope to find a answer.
I have some experience with overclocking a core 2 duo and so ... but i7 is
something new for me and trying to get the picture
I'v read the most of the posts here and now there are some bios related mem problems, but wat ik encounter is somthing verry strange ( i think?) lol.
Whel let me explain my problem first.
It seems my memory (corsair dominator 1886MHz cl 9-9-9-24) only gos higher when i hit my bclk ip ? you say "dude thas normal?" I know but wy run my mem @ 1444MHz when ik set Bclk to 180 x 20 = 3600 an mem multi @ 10x,
It shouldn't hit 1600MHz wright? it always set the mem linked to my (fsb)speeds , no mether what mem multiplayer i use ? It only gos up when i higher my fsb !!
i try to explain wit pics ;-)

These are the settings i use

You need to set the UnCore multiplier to 2x ( or higher... if you can ) the Memory Multiplier.
To run 10x Memory BUS Multiplier you need to set the UnCore Multiplier to 20x.
Also, which BIOS version are you using ? Nevermind about that. I saw it on the third screen that took a bit to load.
Try what I told you above, and if it doesn't work, try the same with the G13 BIOS.

[Touge180SX]

OK i went thru all the 3 bios, G13, G15, G16 and for sure i liked G13 the best. took me the longest time to figure out how to get 215 x 21 but i got it, tomorrow I will play more... she needs to cool down...


Freq : 4522.42 MHz (215.35 * 21)

Viper, what voltages did that require and what are your temps if you don't mind?

Oh, and great stuff!

[M.I.K.E.Y]

You need to set the UnCore multiplier to 2x ( or higher... if you can ) the Memory Multiplier.
To run 10x Memory BUS Multiplier you need to set the UnCore Multiplier to 20x.
Also, which BIOS version are you using ? Nevermind about that. I saw it on the third screen that took a bit to load.
Try what I told you above, and if it doesn't work, try the same with the G13 BIOS.

Hi ,

thnx BenchZowner i finally get my mem to run like they shoul'd run lol.
I guess i still have to learn some rules about ocíng a i7 lol.
but i still have some stabillity issues now, think have to use some more Volt here and there ?

Thanks allot for the advise man

[BenchZowner]

Hi ,

thnx BenchZowner i finally get my mem to run like they shoul'd run lol.
I guess i still have to learn some rules about ocíng a i7 lol.
but i still have some stabillity issues now, think have to use some more Volt here and there ?

Thanks allot for the advise man

Run some loops ( 20 ) of test #5 with memtest86+ v2.11 ( memtest.org ).
Make sure you disable the "USB Storage Function" in the Integrated Devices -> USB menu in the BIOS.

If it finds any errors, then you have to "tweak" your memory timings and/or voltage to stabilize it.

[M.I.K.E.Y]

Run some loops ( 20 ) of test #5 with memtest86+ v2.11 ( memtest.org ).
Make sure you disable the "USB Storage Function" in the Integrated Devices -> USB menu in the BIOS.

If it finds any errors, then you have to "tweak" your memory timings and/or voltage to stabilize it.

Alwright now we are talking last night i was in the mood for valetine.... Euh overclocking i mean lol
and i was able to get these settings to run superpi stable:

Bclk = 200
uncore multi X20
mem multi X10
V-core = 1.4V
mem = 1.7V
Qpi/Vtt = +260mv == 1.4V
PLL == d'hont know if i should mess wit that ?
and should i increase de SB volts ?

everything was running fine unthil i was experimenting with the CPU settings PMM, EIST, CxE ???
now it cant get pass the memtest POST on bootup?
I will try the G13 again
Also still trying to get the X21 multi to work @ 100% to ??

[Mayk-Freak]

With which BIOS does the setting come, that the TDP-Bug will be fixed and the Multi will hold the 21 by over 1,45 V V-Core?

Gigabyte has it

DFI LANparty UT X58-T3eH8 has it:


Asus Rampage II Extreme X58 has it:


Foxconn Bloodrage need it too:

[MikeMK]

Hey guys, well I ordered my bloodrage yesterday, along with 6gb corsair dominator. Should be here by Tuesday, so all I have to order now is my CPU! Cant wait to get started now

[Lu(ky]

Hey guys, well I ordered my bloodrage yesterday, along with 6gb corsair dominator. Should be here by Tuesday, so all I have to order now is my CPU! Cant wait to get started now

Hi MikeMK where did you order it from? I been looking everywhere for this thing. I even emailed there head quarters in CA but no reply. ..

[MikeMK]

Im in the uk mate, so prob not much use to you, but I for info I got it here:

http://www.novatech.co.uk/novatech/s...html?FOX-BLOOD

[Goreg]

Hey guys, well I ordered my bloodrage yesterday, along with 6gb corsair dominator. Should be here by Tuesday, so all I have to order now is my CPU! Cant wait to get started now

mines sitting in my room, waiting for a home and a CPU
also ordered from novatech, ordered friday, next working day... and turned up on saturday

[MikeMK]

nice... normally they charge extra for sat delivery. Really cant decide what CPU im gonna get. I have the cash for a 965, but cant decide whether to get it or not. A 920 is a more sensible option... just would have to hope for a good batch!

[Paxi]

I would go with the 920. With a bit of luck you´ll get a good batch and it will fly on your bloodrage :P Even with a bad 920 you´ll probably be able to hit 4ghz under WC.

[Goreg]

Got mine today , my friend is coming over tomorrow to "help" me put it together. Anyone know anything about the 920 batches? Mine is 3838B107

[SAE]

Just try and report back - two cpus of same batch ain't created equal, one does well, its twin suxx.

[saaya]

With which BIOS does the setting come, that the TDP-Bug will be fixed and the Multi will hold the 21 by over 1,45 V V-Core?

Gigabyte has it

DFI LANparty UT X58-T3eH8 has it:


Asus Rampage II Extreme X58 has it:


Foxconn Bloodrage need it too:

geez, how many threads did you post this in?
again, its not a bug, other board makers automatically change the tdp and tdc settings to a certain value, we have an option where you can actually chose any value you want for tdp or tdc

just set it to 1200 for tdp and tdc and it should be fine
(1 step is 1/8A or 1/8W)

[jooney]

Where is this option saaya?
Or did it come with the next new Bios?

[xXlAinXx]

First QuickShoot from mine Blood Rage

[dave510]

I'm up and running on G13!! I don't know much about overclocking yet, though, so I'll be spending the rest of my week crawling these forums before attempting anything.

[r1ch]

dave i'd suggest G19

http://www.benchzone.com/Downloads/B...onn/BloodRage/

I have been using it for a week or so but was told not to post it, Bill has obviously been given the ok

No need to push Uncore/VTT unless you're going for high DDR3. +180mv took me to 220bclk. All i'd say it watch the vcore load. Enjoy.

[Touge180SX]

I'm up and running on G13!! I don't know much about overclocking yet, though, so I'll be spending the rest of my week crawling these forums before attempting anything.

Awesome Dave!

[M.I.K.E.Y]

dave i'd suggest G19

http://www.benchzone.com/Downloads/B...onn/BloodRage/

I have been using it for a week or so but was told not to post it, Bill has obviously been given the ok

No need to push Uncore/VTT unless you're going for high DDR3. +180mv took me to 220bclk. All i'd say it watch the vcore load. Enjoy.

cool i give it a go

[Mayk-Freak]

My Foxconn Bloodrage BCLK 214 Prime95 stable!





220BCLK 1M

[cliobaby99]

@ saaya
Can you tell me, where the option is, which you tell Mayk-Freak?

[bahlgren342]

My Foxconn Bloodrage BCLK 214 Prime95 stable!

I'm genuinely jealous of everyone that has this board already!

[hiwa]

in europe i can't found it lucky guys enjoy that monster