A DATA Triple channel 2133X "ELPIDA" ICs @2000 CL7-8-7-20-1T 1.55V Memtest

**~~KELL5~~** · 01-27-2009, 06:07 AM

8 triple channel kits left, better hurry

I can pay for and order upto 4 kits and despatch them worldwide via UPS/DHL/etc if shipping is covered

Just say the word

**SAE** · 01-27-2009, 06:14 AM

Well, that's DDR3-1333 and not 2133, isn't it!?

**~~KELL5~~** · 01-27-2009, 06:15 AM

Originally Posted by AndreYang

your wish

Wow Andre, my eye just popped out when I saw this

those numbers are mindboggling

Originally Posted by SAE

Well, that's DDR3-1333 and not 2133, isn't it!?

I truely am in need of more coffee, my bad

**eva2000** · 01-27-2009, 07:01 AM

Originally Posted by SAE

Well, that's DDR3-1333 and not 2133, isn't it!?

You should know better, it all depends what's under the hood

I know of DDR3-1333 rated kits that cost US$100-140 3GB or US$180-250 6GB (Australian converted prices not sure on USA prices) that can potentially do DDR3-1600 8-8-8-24 at 1.5-1.65v easy.

**SAE** · 01-27-2009, 07:47 AM

Jup, I know (though I have practically no knowledge of DDR2/3). But the topic says DDR3-2133 and he was posting 1333MHz mem. That was just a hint, hehe.

I think he increased his caffeine input because of this, so that should help the economy a bit, huh?

**ChaosAD** · 01-27-2009, 07:56 AM

Just checked a Greek website and found them for 519 euro. Isnt it a little too much for a memory kit?

http://www.plaisio.gr/product.aspx?p...727&catalog=20

**kcnyc** · 01-27-2009, 09:05 AM

Originally Posted by ChaosAD

Just checked a Greek website and found them for 519 euro. Isnt it a little too much for a memory kit?

http://www.plaisio.gr/product.aspx?p...727&catalog=20

Yes it is too much. Once you buy it, you will be stuck with it. After using it for a few months, and you think of re-selling them, you will probably take a $350 hit depreciation. Trust me, prices will go down once the Elpidas are more widely available.

**Kimofil** · 01-28-2009, 05:30 AM

Insane numbers with this sticks.

**~~KELL5~~** · 01-28-2009, 06:24 AM

Originally Posted by SAE

I think he increased his caffeine input because of this, so that should help the economy a bit, huh?

Yes, I have a caffeine drip in my arm now.....no more eroors from me

(aw bugger it)

**MrHydes** · 02-05-2009, 10:40 AM

OMgodness that's freaking crazy bandwitdh... these kits seems to be

even better than corsair dominator gt that are officially released today

online... Adata FTW

thanks Andre yang for the samples

**V2-V3** · 02-06-2009, 09:26 AM

Andre, you are an overclocking fiend!

Kick ass scores w/ the ADATA kit I am simply amazed at these new memories coming out.

**Benji Tshi** · 02-07-2009, 08:20 PM

The question is : is it a pretested kit or a commercial one...I hope we will have the same level of performances (and i hope my IMC will allow me such frequencies

)

**systemviper** · 02-07-2009, 08:29 PM

Oh how annoying @ AndreYang
just kidding, now i need more more more...

thanks for the excellent effort and sharing it... Rock on

**neo mike** · 02-07-2009, 09:09 PM

Those are kick butt sticks wowww, where can i get a set of these ? i heard there not for sale in america, whyyyyyyyyyy, but anyway where can i purchase these ?

**Cliff Burton** · 02-08-2009, 04:13 AM

Redo the latency results with EVEREST 5.00.1650 and you will find a surprise

**Benji Tshi** · 02-08-2009, 04:16 AM

About +80% (or -80%, depends on your point of view, but i was 25ms, ans i am 40ms now)

**tripgood** · 02-08-2009, 08:50 AM

Originally Posted by Benji Tshi

About +80% (or -80%, depends on your point of view, but i was 25ms, ans i am 40ms now)

That's why Everest is not a primary benchmark I guess.

**slim142** · 02-13-2009, 12:44 PM

Oh man, My CSX Diablos are not even 6 months old and I want this kit already!

Hopefully Elpida will increase production and dont run out of them like Micron with D9s

**ChaosAD** · 02-13-2009, 01:07 PM

I also like what i see here from this kit, but tbh i do not think that a comercial Adata 2133X kit will perform even close to it.

**slim142** · 02-13-2009, 01:50 PM

Hopefully it will, that way other companies will have a hard competition.

**ChaosAD** · 02-17-2009, 07:23 AM

Well still noone with a retail kit to test? C'mon I want to know if 2000+c8 is doable with 1.65v

**pinto** · 02-17-2009, 07:51 AM

I got the 3gb retail kit and it perfectly works at 2000 C7 1.65v. Here a validation at 2200mhz C7 1.75v: http://valid.canardpc.com/show_oc.php?id=508925

**ChaosAD** · 02-17-2009, 08:07 AM

Thanx for the post pinto. I m a little concered tbh since adata states that kit need 2+v for c10. I dont think the 6Gb kit will differ so much than yours. I just need 2000-2100c8 max but @ 1.65 for daily use.

**~~TheKarmakazi~~** · 02-17-2009, 08:11 AM

Originally Posted by ChaosAD

I also like what i see here from this kit, but tbh i do not think that a comercial Adata 2133X kit will perform even close to it.

Yeah Im pretty sure this is an ultra handpicked binned masterpiece

**Johnny Bravo** · 02-17-2009, 08:13 AM

Originally Posted by pinto

I got the 3gb retail kit and it perfectly works at 2000 C7 1.65v. Here a validation at 2200mhz C7 1.75v: http://valid.canardpc.com/show_oc.php?id=508925

Great stuff Pinto may I ask where you purchased these from?

Thread: A DATA Triple channel 2133X "ELPIDA" ICs @2000 CL7-8-7-20-1T 1.55V Memtest

Thread Tools

Search Thread

Rate This Thread

Display

wow

Bookmarks

Bookmarks

Posting Permissions