** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[EliTE22]

elite22 please tell me more about the MCH/DRAM reference. I was looking at your
templates and i understand all of your settings. I am stuck trying to increase my
fsb. I have messed with every setting on this thing except the mch/dram reference
I am assuming that you would just do it the same as all the other mch settings
ie... set it up to where memtest just starts to fail, and then start experimenting
with the mch/dram reference until it gets better or worse. I have never even
touched that setting. Does it have a dramatic effect (like the mch ref does) ?
Can you give me any hints?
Very nice cloking you do there. I like it. Impressive.
I want some stable high fsb action here. I seem to be stuck at about 515.

its is basic off the dram voltage & mch, u should increase it for higher dram voltage. i did not see much change, but it should be scaled up like all the ref. voltage as there are not (0.67x, 0.63x, etc.) like on some motherboards they need to be increase with the cpu term and dram voltage they will also scale up if u use( + , - ) in the bios when increasing cpu term, and dram voltages, when cpu term increase this way both the cpu ref. and mch ref. voltages increase with it and when dram is increased mch/dram ref. increases
hope that helps
btw:post ur settings so i can see what u r trying