Thermochill PA140.X (For use with 140mm Fans) Voice Your Opinion!

[warriorpoet]

I LIKE the paint, very understated

I'll have to figure out how to rad box a .3

[ILikeCosmosS]

horrible idea i dont like the idea of 140 fans
even though it make increase cooling most cases wont fit it unless u got a one of those mountain mod cases
(i wonder how big they are i might want to buy one to put two 360 rads in there)

[SNiiPE_DoGG]

v2010 and i think the tj07 will fit it, that is the only ones currently on the market that are still in production that will :\


as much as I like the idea of rads getting bigger, cases simply wont accommodate them as it is.

[gilgamesh1]

Gilgamesh has received the first prototype of the PA140.3 Thermolchill, some nice pics!
http://www.gilgamesh.org.uk/forums/showthread.php?t=239

yup as LC has said, I have the RAD!

I will begin testing data as soon as I come back from DFI HQ in Taiwan!

SO I hope this lays rest to all those who said Steve/thermochill/over-clock would not produce a PA140.3

Watch this space folks and my forums

as I promise I WILL have the PA-120.4 and the PA120.3 (QUAD PASS) After testing data has been completed.

gilgamesh

[G-UNIT91]

yup as LC has said, I have the RAD!

I will begin testing data as soon as I come back from DFI HQ in Taiwan!

SO I hope this lays rest to all those who said Steve/thermochill/over-clock would not produce a PA140.3

Watch this space folks and my forums

as I promise I WILL have the PA-120.4 and the PA120.3 (QUAD PASS) After testing data has been completed.

gilgamesh

I'm impatience

[gilgamesh1]

I'm impatience

gods mate I feel your frustration!

Really want to get into testing this thing, but im off to Taiwan to work on some of DFI's motherboard designs.

expect many things when Igetback

gilgamesh

[G-UNIT91]

gods mate I feel your frustration!

Really want to get into testing this thing, but im off to Taiwan to work on some of DFI's motherboard designs.

expect many things when Igetback

gilgamesh

THX

[DeathWalking]

as I promise I WILL have the PA-120.4 and the PA120.3 (QUAD PASS) After testing data has been completed.

[emphasis mine]

Give us more details on the fact that it's a quad pass radiator? Sounds interesting.

[eXa]

O_o

I never thought it would come... it looks perfect. And i do like the g3/8 threads...

[MaxxxRacer]

Holy Thread revival Batman!

It only took nearly 2 years, but it is finally here.

And for all of those G3/8 haters out there, go buy a Koolance system and shut up.

[SyntheticOrange]

v2010 and i think the tj07 will fit it, that is the only ones currently on the market that are still in production that will :\

The Tyr PC-X2000 too, fits almost perfectly in the front of one of those.

[TNTSunshine]

G3/8? These work just fine from BP:

http://www.performance-pcs.com/catal...ducts_id=23549

[v0dka]

This rad might bring me back to watercooling. Just need a case to fit it in though.

Little dissapointing to see they still have that lousy paintjob and G3/8 thread.

It's only a prototype, as stated in colossal blue letters.

[situman]

Wonder if I can install this in a LL 343B.

[eXa]

The Tyr PC-X2000 too, fits almost perfectly in the front of one of those.

You need to cut away some of the divider plate between the middle chamber and the lower hdd chamber. Also u need to cut into the divider plate between the middle chamber and the upper chamber since the rad is to long to fit there. But yes, i think you would be able to fit it with some cutting. (and yes i know its 140mm fans in the tyr, not 120mm)