Building a Sossaman rig?

**ibby** · 02-13-2009, 08:04 AM

are these award ?
or phonix ?

thanks

**Anarki** · 02-13-2009, 08:50 AM

For those of you running sossaman rigs who want to pin mod their CPU's to 200FSB take a look at this from our very own forum: Link here

I own a couple of socket M (479) motherboards so I am very interested in this particular tech.

I just wonder if one of these sossamans will go into an AOpen i975xa-ydg motherboard! If they can I may have to set a WR!

**NaeKuh** · 02-13-2009, 09:43 AM

ibby im having dave send you a extra board to monkey with.

i know what your capable of with bioses...

**ibby** · 02-13-2009, 12:05 PM

any one got a BIOS saviour ?

**ibby** · 02-13-2009, 12:12 PM

Originally Posted by NaeKuh

ibby im having dave send you a extra board to monkey with.

i know what your capable of with bioses...

What ever you have heard its all wrong

**Movieman** · 02-13-2009, 12:48 PM

Originally Posted by Anarki

For those of you running sossaman rigs who want to pin mod their CPU's to 200FSB take a look at this from our very own forum: Link here

I own a couple of socket M (479) motherboards so I am very interested in this particular tech.

I just wonder if one of these sossamans will go into an AOpen i975xa-ydg motherboard! If they can I may have to set a WR!

different pinout than the yonahs, I tried a yonah in the Intel board and no go..Wouldn't post..and I have two T2300's that I tried together..

Opps, forgot.. Ordered 3 Intel boards last night.. two for Ibby and one more for me to have..

**Anarki** · 02-13-2009, 01:10 PM

Originally Posted by Movieman

different pinout than the yonahs, I tried a yonah in the Intel board and no go..Wouldn't post..and I have two T2300's that I tried together..

Opps, forgot.. Ordered 3 Intel boards last night.. two for Ibby and one more for me to have..

So they have the same pin layout as socket M (479) Yonahs/Merons, but have a different pinout?

Did Intel do this to prevent dual Yonah/Meron setups? Or do the sossamans have a particular code that allow SMP? I mean they aren't even 64bit capable!

Crazy weird CPU's these sossamans! If I could get some for cheap here in the UK put me down for a dual sossaman setup on that cheap ass $19 Intel board you all have!

**~~just a noob~~** · 02-13-2009, 04:57 PM

hey dave, you seem to know quite a bit about sausage man rigs, is there a board with quad sockets?

**Movieman** · 02-13-2009, 06:01 PM

Originally Posted by Anarki

So they have the same pin layout as socket M (479) Yonahs/Merons, but have a different pinout?

Did Intel do this to prevent dual Yonah/Meron setups? Or do the sossamans have a particular code that allow SMP? I mean they aren't even 64bit capable!

Crazy weird CPU's these sossamans! If I could get some for cheap here in the UK put me down for a dual sossaman setup on that cheap ass $19 Intel board you all have!

I don't know why they did it but yes, same socket put different pinout.
A shame.. Think of a couple top Meroms in one of these boards.
ibby is getting two boards from me but I bought three.
If you want one of those I could send him the three and you two can work out shipping one to you.
He's also in the UK..
They just shipped from california today so you have a few days to think about this and talk with him.

Originally Posted by just a noob

hey dave, you seem to know quite a bit about sausage man rigs, is there a board with quad sockets?

If there was it would be here..

**Movieman** · 02-13-2009, 07:41 PM

Perfect PSU for Sammy:
http://www.newegg.com/Special/ShellShocker.aspx
$49.99..with a $20.00 MIR..
24 and 8 pin power..

**ibby** · 02-13-2009, 08:30 PM

Originally Posted by Movieman

I don't know why they did it but yes, same socket put different pinout.
A shame.. Think of a couple top Meroms in one of these boards.
ibby is getting two boards from me but I bought three.
If you want one of those I could send him the three and you two can work out shipping one to you.
He's also in the UK..
They just shipped from california today so you have a few days to think about this and talk with him.

If there was it would be here..

I dont mind helping him out

but remmber to sell him the rear cpu plates and heatsinks!

**Movieman** · 02-13-2009, 08:35 PM

Originally Posted by ibby

I dont mind helping him out

but remmber to sell him the rear cpu plates and heatsinks!

Thanks for reminding me, I'll order a couple of the cpu plates. The heatsinks I can drive down to get..19 miles from here.

**ibby** · 02-13-2009, 08:57 PM

Originally Posted by Movieman

Thanks for reminding me, I'll order a couple of the cpu plates. The heatsinks I can drive down to get..19 miles from here.

The actuall brackets supplied with the board are not wrong.

they are made for case stand offs.

Can you tell me,
Does the board post with one cpu ?

or do both need to be plugged in ?

**Movieman** · 02-13-2009, 09:01 PM

Originally Posted by ibby

The actuall brackets supplied with the board are not wrong.

they are made for case stand offs.

Can you tell me,
Does the board post with one cpu ?

or do both need to be plugged in ?

no, two cpu's needed to post OR there is a dummy available, like they used to need with the old dual P3 xeons..

**ibby** · 02-13-2009, 09:05 PM

can you do me a favour please
see if you can aqure me a dummy processor!

I dont want to remove to hs to get to the socket every time!

**Movieman** · 02-13-2009, 09:29 PM

Originally Posted by ibby

can you do me a favour please
see if you can aqure me a dummy processor!

I dont want to remove to hs to get to the socket every time!

Trust me, the easiest one you ever worked on..
cake as we say here..white cake and plenty of room even in a case..and you can test without fans..

at 100% load and no fans it's 68C.. With a 80mm cheapo fan it's 34c..
Idles app 21c in a 72F room..

**Martijn** · 02-13-2009, 11:56 PM

Originally Posted by Movieman

Trust me, the easiest one you ever worked on..
cake as we say here..white cake and plenty of room even in a case..and you can test without fans..

at 100% load and no fans it's 68C.. With a 80mm cheapo fan it's 34c..
Idles app 21c in a 72F room..

You don't want to close it all up in a case without fans though. The first time I did that my CPUs were at 100C

Placed a 120mm 700rpm fan over it and they're now at 40Cs loaded.

**ibby** · 02-14-2009, 06:56 AM

Originally Posted by Movieman

no, two cpu's needed to post OR there is a dummy available, like they used to need with the old dual P3 xeons..

Originally Posted by Movieman

Trust me, the easiest one you ever worked on..
cake as we say here..white cake and plenty of room even in a case..and you can test without fans..

at 100% load and no fans it's 68C.. With a 80mm cheapo fan it's 34c..
Idles app 21c in a 72F room..

Yes but it makes my life easier to wiremod one socket and try

**Anarki** · 02-14-2009, 11:10 AM

So where are you guys finding these Sossaman CPU's for sale? Preferably the 2GHz ones

**Jaco** · 02-14-2009, 11:20 AM

send a PM to Movieman

**ibby** · 02-15-2009, 12:07 PM

I urgently need BIOS Screen pictures of the CPU config page
and any selectable options

Thanks

**Movieman** · 02-15-2009, 02:43 PM

That I can do..BUT since I never learned how to capture on it will have to be camera pics of the screen..Is that ok?

**ibby** · 02-15-2009, 02:57 PM

Originally Posted by Movieman

That I can do..BUT since I never learned how to capture on it will have to be camera pics of the screen..Is that ok?

THats fine please

**Movieman** · 02-15-2009, 02:58 PM

Originally Posted by ibby

THats fine please

Ok, off to get them..

**ibby** · 02-15-2009, 03:30 PM

Originally Posted by Movieman

Ok, off to get them..

I think you have fallen asleep

Thread: Building a Sossaman rig?

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions