Gigabyte EX58-UD5/Extreme Discussion Thread

[technut36]

I am so frustrated trying to figure out whos values to u, there are so many post with all the bios setting, i am looking for a descent i920 oc to 3.8-4 ghz, on air.

could you guys please guide me choosing setting/tempelate that works and would fit me.

[Terlcartman]

I am so frustrated trying to figure out whos values to u, there are so many post with all the bios setting, i am looking for a descent i920 oc to 3.8-4 ghz, on air.

could you guys please guide me choosing setting/tempelate that works and would fit me.

I know what you mean I have read hundreds, if not thousands of posts now trying to figure this all out, but I think the issue is as stated before every chip/MB/Memory is different that is why everyone has different settings. I was able to get to 3.8, (multiple LinX 20 runs and no crashes ever) with the setting in my signature under 3.8. As you can see I am using mostly auto settings and really only changing the multi to 19x, Bclk to 200, Turbo off, and Vcore to 1.33125. Everything else is auto. I hit a real wall trying to get to 4.0 ghz from both a temp and BSD/POST perspective. Only switching to the F5 series Bios made this possible but I am sure I could go higher if I go down the water cooling path as SteveRo did.

[road-runner]

Finally got the GTZ block got tired of waiting on dtek, messed with my 920 a little last night...

[revenant]

I am so frustrated trying to figure out whos values to u, there are so many post with all the bios setting, i am looking for a descent i920 oc to 3.8-4 ghz, on air.

could you guys please guide me choosing setting/tempelate that works and would fit me.

http://www.xtremesystems.org/forums/...d.php?t=214437

check this thread. it's got some good info... pretty much you should only need to hard set your memory timings and the only voltages to adjust should be vcore, vdimm, and qpi with the kind of OC you are shooting for.. anyways.. check the settings others posted for the desired clocks you want.