Silverstone Showcase

[RomDominance]

@RomDominance • I love your case so much , what radiator

Thanks guys for the kudos, much appreciated and nice work yourselves, gotta love these silverstone rigs.

The upper gpu rad is the swiftech mcr320 and the mobo rad on the back of the case fan is a feser 120....all the fans are either the silverstone hi cfm or logisys. Hope that helps, end transmission.

[1avatar]

Is it just me or is this fan facing the wrong direction?

Great rigs by the way, everyone!

Yep, I've got the mid case and rear fan supplying the cool air and the two top fans shooting it straight out. After a fair bit of experimenting, this netted me idle temps of 28-29deg and load of 55-58 @ 3.91GHz.

[Efekkt]

Heya Efekkt - I'm using the Coolermaster Blue LED 120mm. I've got them attached to a Zalman MFC2 controller and spinning at just over 1000rpm so it's quiet, gives a nice light off and still gives decent flow.

oh do you mean these? because yours look transparent-ish. :O

http://www.coolermaster.com/products...detail&id=4355

[1avatar]

oh do you mean these? because yours look transparent-ish. :O

http://www.coolermaster.com/products...detail&id=4355

Nope, these ones - http://www.coolermaster.com/products...bcate=36&id=95

[Efekkt]

Nope, these ones - http://www.coolermaster.com/products...bcate=36&id=95

oh, how's the airflow on those? i read that those are only 39 CFM fans?

[MrHydes]

Hi all, This is my first post. My rig is

INTEL Q6600
EVGA N680I A1 REV
8 GB DDR2 @ 1066 MHZ DOMINATORS
1 X 750 GB 5 X 1TB HARD DRIVES
2 X XFX 8800 GTX IN SLI
LG DVD RW INTERNAL
LG BD RW EXTERNAL
G9, G15
SILVERSTONE TJ-10-BW CASING
LG W3000H 30" MONITOR

All are stock no overclock, some cable management has to be done

awsome aircooled rig

simple and powerfull

[1avatar]

oh, how's the airflow on those? i read that those are only 39 CFM fans?

Runs cool enough. I have them up top, one in the mid case fan. The rear fan is an old Antec Tri-Cool I'm going to replace shortly and I've got the 1150rpm Scythe Gentle Typhoon on the TRUE. My idle temps sit at about 30-31 Deg while load doesn't got over 60. That's also at 3.91GHz with 8GB of RAM clocked at 570mhz so it's enough for me. I'm probably going to throw a water loop in there though just to help keep the noise down and see how much further I can push the clocks.

[Kozato]

Hi, I am from singapore. This is my TJ-03.





Specs:
Q9550 @ 3.6ghz + Swiftech Apogee GTZ
powercolor 4870x2 + Dangerden 4870x2 Waterblock
MSI P45 Platinum
Team Xtreem Dark 2x2gb DD2-1066
Auzentech Xplosion 7.1 Gold
Velociraptor 150gb
Seagate 7200.11 1.5TB
Corsair HX620
Swiftech MCR320-QP
Swiftech MCP355 + XSPC Restop.

Changing to TJ-07 soon.

[Mike44]

front intake

Neat! You're able to actually fit a quad rad down there? Giving me some ideas here.......

@ Kozato: Nice workstation ya got there! Very clean and simple! I sooo want a screen that size too, lol!

Mike

[cstkl1]

underated case

but totally recommended for users with hx1000 and asus re/r2e
tweak it now can actually be used in a case with ease.

[cstkl1]

btw took only 30 mins to do this..

will be doing a proper cable management later..
need to route that cpu connector and get some extension for the coolit pcb and definately longer sata cables as currently using the optical drive at lowest bay.

[cstkl1]

Neat! You're able to actually fit a quad rad down there? Giving me some ideas here.......

@ Kozato: Nice workstation ya got there! Very clean and simple! I sooo want a screen that size too, lol!

Mike

could have sworn i have seen somebody with a quad + triple/dual rad at the bottom with tj07

[Mike44]

could have sworn i have seen somebody with a quad + triple/dual rad at the bottom with tj07

Really!!?? Would need to have some serious air flow through the bottom then...unless one rad pulled air through itself and ejected the hot air into the other? So I guess it can be done then, eh? Pretty neat.

And hey, nice case case cst! Is it just me or does it look.....kinda tipped? Lol, very interesting design!

Mike

[cstkl1]

Really!!?? Would need to have some serious air flow through the bottom then...unless one rad pulled air through itself and ejected the hot air into the other? So I guess it can be done then, eh? Pretty neat.

And hey, nice case case cst! Is it just me or does it look.....kinda tipped? Lol, very interesting design!

Mike

kekek nope actually the coolit fan..
replaced it..
somehow misplaced one screw
so thats y.
just shifted it from a tj07

and still have another tj07 with the motherboard tray missing( actually stolen when i was drying it in the lawn after spray paint :P)

[cstkl1]

btw the reason was because of the tweak it function..
now for the first time can actually use it with ease in a case.

[Dinho Fatal1ty®]

Nicee cases !!!!!!!!

[MrHydes]

awsome theres one there that must have some engineering

[Markmk]

ok guys. 15 months after setting this thread up if FINALLY finished my watercooling. Im very pleased with the results

[XHAFMaster]

front intake

What LCD is that please???

[Markmk]

could have sworn i have seen somebody with a quad + triple/dual rad at the bottom with tj07

Ive seen a triple/quad with a duel rad on the bottom but not a quad and triple. Biggest problem i can see would the the PSU. You would have to have a small sized PSU to even stand a chance.

[CryptiK]

Thanks guys!

That's a bad ass system RomDominance!

Here's some updated ones, finally got my fan bracket for the TRUE in today, still finishing up the AcoustiPak sound dampening material.

http://www.avatardesignsystems.com/c...r/IMG_6767.JPG

http://www.avatardesignsystems.com/c...r/IMG_6769.JPG

http://www.avatardesignsystems.com/c...r/IMG_6770.JPG

http://www.avatardesignsystems.com/computer/desktop.JPG

That's a very neat looking case. Your case fan setup appears quite unorthodox; are all the case fans are intakes, with no exhaust?

[1avatar]

That's a very neat looking case. Your case fan setup appears quite unorthodox; are all the case fans are intakes, with no exhaust?

Top two are exhaust while the rear and mid are intakes. They're high enough cfm that I've found it to be both quiet and stable to run no hotter than 60 at load on a Q9550 C1 @ 3.91Ghz

[PaRn ssR]

[Taylor01]

Here is my little HTPC. I will be upgrading to i7 here shortly. So I am going to move the fan conrtoller out the front of the case beneath the front rad. I will also remove the fans in front because they do absloluty nothing for temp wise and I should then have enough room to mount the pump in side.

[Rasmus66]

New and better pics of my lan gamer