Quote Originally Posted by Akrian View Post
OC I have been able to run my Gskill ram at 1406 6-6-6-9 2t perf lvl 6 stable . ( using the 1:3.2 devider , 1:3 dosent work at all )
439x8.5 CPU
Vcore 1.37
Vtt 1.35
NB 1.56 ( actual 1.6)
SB 1.5
Vram ( 1.76 actual)
Have been trying to get 440 and higher FSB , but though my CPU temps are fine , and it can go hours in prime , it crashes within 15 min in GTA4 starting 440 fsb .
And I still didn't manage to get this ram working at rated or higher speed . =(
What memory is it? 1600 or 1800?
2x1gb or 2xgb?
what cpu are you using?
what prime test are you running?
and i heard a lot about gta4 crashing, it doesnt necessarily mean the system is unstable does gta4 work better at lower speeds?
what PL are you running at 440fsb? PL6? thats pretty tight, did you try PL7?
How are your nb temps?

Quote Originally Posted by TC4GHZOC View Post
You can add OCZ special ops Urban Elite DDR3 2 X 2GB kits to the list. I was able to run 8 GB's on the board at 1700 MHZ 8-8-8-24.

Link to the RAM on the egg.
http://www.newegg.com/Product/Produc...82E16820227324
8GB at 1700, sweet

Quote Originally Posted by TC4GHZOC View Post
Set it to 1:4 333 and ran 1.993 volts. I only set the timing to 8-8-8-24 and got it to 1700 MHZ ( 425 FSB). Nothing I did let it go even 1 MHZ faster
did you try 2 sticks to see if the mem is maxed out of if the controller cant handle more? maybe one of your sticks is holding you back. what PL are you running? what chipset voltage? how are you cooling your nb?

Quote Originally Posted by Akrian View Post
Hi , I was wondering should I get this pair of ram :
http://www.newegg.com/Product/Produc...82E16820231232
G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1800 (PC3 14400)
Anyone tried to run it ?
P.S. I just want to set them up , so they would around 1776 speed ( that where I'm at , If I would to use 1:4 333 devider ) .
My current ram set up at 1420 with 6-6-6-12 PL6 and 1T ( still testing the it on 1T though) ( 1:3.2 devider ).
Or can you suggest any other 2x2gb ram that will bring me to this speed ( 1800 and 2000 doesnt cost that much of a difference on newegg , so I don't even know which one to get )
im not that up to date with mem anymore, but from what i heard the new elpdia ddr3 chips seem to be very nice
clocking to 1800+ with 777 and only 1.7v
at least thats on i7, on x48 they probably need some more vdimm and might not clock that well, but 1800 777 is still very nice!