Foxconn BlackOps Shared BIOS settings

[Akrian]

I think I might get 444 fsb working ... done couple of tests , but didnt try the "cusrsed game" yet . Gonna test it when I get home .
Still I could not manage to get 447 stable . Temps are fine everywhere ( NB , Video , CPU , PSU , HDD ) , but it still keep giving me error crash code 4 in OCCT in couple of minutes .
I don't want to rais NB volts beyong 1.6 though , at least not for 24/7 use .
currents settings :
444 x 8.5
CPU v - 1.384 ( 1.36-1.37 actual)
CPU PLL - 1.58
CPU VTT 1.35 ( 1.25 actual) or 1.425 ( still didnt deside which is better) +10,+5,+10,+10
NB - 1.563 ( 1.61 actual , or at elast that what Aegis , and Speed Fan , and Cpu-Z shows)
NB skew +5
SB - 1.575
Vram - 1.725 ( 1.76 actual)
other voltage setting for ram on auto
Ram devider 1:3.2
timings : 6-6-6-12 PL6 2T
any ideas how to get to 447 stable ? (I'm out of ideas X_X )
I really want to se my damn cpu on 3.8ghz working stable
Systems Specs :
Q9550 E0
BlackOps mobo
160gb hdd seagate 7200rpm
4870x2 @ 800/3600
Gskill 2x2gb ddr3 1600 ram .
lots of fans XD
Zerotherm Nirvana CPU cooler ( blockes first mem slot , but seems to do the job when it comes to cooling).
P.S. because of the awfull screw on the cooler , I could tighten two of them completely , so now everest , and OCCT shows core temps like this : 27 , 30 , 41,40 when resting , and 50,51,49,52 ( aprox ) when under load .
I tryed 5 times to tigten those b*stards but cant do it with my hends , and there is no screw driver that will be able to screw them when the cooler is mounted and blocking pretty much the screw halls ( when you look from the top) .