Core i7 Overclocking by Batch #

[anzial]

QPI is 1.3v, CPU PLL 1.8, CPU VTT is 1.36, and CPU itself shows as 1.312 in cpu-z (not sure if I can believe it, since it does not change from idle to load, although rarely under load it drops momentarily to 1.296). I have a biostar mobo and vcore is only set relative to some value, don't know what that is, probably stock voltage or something, in my case it takes +0.08v. For the same reason, I don't have any control over uncore, according to memset it's 16x, and memory I keep at 2:8, all automatic timings, 1.64vimm. Last, and most important, cpu is at 21x and 191bclk, and not 200x20, the latter is completely unstable. Hope this will help you to oc' your cpu to 4ghz as well

[Postmodum]

Ok, the best i can is 19x200 @ 1.28v core and 1.28 qpi voltage. Everything else is auto.

Is there any way to get lower vcores? I mean, with what settings can i compensate a lower vcore? I see people getting 3.8 with vcore values lower than 1.28 but at the same time i'm really noob at Oc'ing so i don't know what settings to change in order to compensate lower vcore values.

My Batch # 3839A569 and i'm using a P6T Deluxe with latest bios ( 1102 ) and 6Gb of Dominators 1600 (C8 ).

[gonx_me]

Can you post your configuration? I also have the same CPU batch, mas i can even post with more than 175Mhz QPI. But i'm on a EVGA X58.

Ok, the best i can is 19x200 @ 1.28v core and 1.28 qpi voltage. Everything else is auto.

Is there any way to get lower vcores? I mean, with what settings can i compensate a lower vcore? I see people getting 3.8 with vcore values lower than 1.28 but at the same time i'm really noob at Oc'ing so i don't know what settings to change in order to compensate lower vcore values.

My Batch # 3839A569 and i'm using a P6T Deluxe with latest bios ( 1102 ) and 6Gb of Dominators 1600 (C8 ).