Evga Voltage Tuner

[Diverge]

Here ya's go, a GUI for ya's..with sliders for the folks that were obsessed with them

It's pretty simple, it doesn't read anything in realtime. It's not too useful, only eases finding the voltages you want @ your stable clocks. After that, it's alot easier to use rivatuners scheduler to apply settings at windows startup.

The GUI just increments the VID values via the slider, and shows the appropriate conversion in volts. Adjust the slider, and hit the Set Voltage button, and both 2D and 3D voltages are set. Nothing is applied until you hit the Set Voltage button.

And easy check to see if all is working good it to open furmark (no need to start it), check 3D voltage. close all 3d apps, check idle voltage

It works for 280gtx for IC2 Bus value of 3, and uses the following default registers:

Register 15 - 3B = 59 = 1.1875v <---3D voltage
Register 18 - 35 = 53 = 1.1125v <---2D voltage

Drop it in your rivatuner directory and run it.

Here's what it looks like:



I might play around with the code some more, and add some stuff.. But don't expect too much. I usually get bored and never go back to things lol It's more fun for me trying to get the program to do what I want, rather then using it. I teach myself C# as I figure out stuff.

Disclaimer: Use at your own risk!

Edit: attachment removed, use one below.