Where can I grab OCCT?

Here's a little more for you just finished playing with 3dmark Ill run prime a little later... Still not happy with 3.7ghz, I want atleast 3.8 before I give up. Granted this is just 3dmark and not a multithreaded prime instance but here's a little more:



From Coretemp while running 3dmark:
13:39:58,33°,,,27°,35°,92%,3700.40 MHz,
13:40:09,33°,,,27°,35°,97%,3700.40 MHz,
13:40:18,33°,,,27°,35°,83%,3700.40 MHz,
13:40:28,33°,,,27°,35°,100%,3700.40 MHz,
13:40:38,33°,,,27°,35°,100%,3700.40 MHz,
13:40:48,33°,,,27°,35°,100%,3700.40 MHz,
13:40:58,33°,,,27°,35°,94%,3700.40 MHz,
13:41:08,33°,,,27°,35°,88%,3700.40 MHz,
13:41:24,33°,,,27°,35°,97%,3700.40 MHz,
13:41:29,33°,,,27°,35°,32%,3700.40 MHz,
13:41:39,39°,,,27°,39°,94%,3700.40 MHz,
13:41:49,40°,,,27°,40°,97%,3700.40 MHz,
13:42:01,39°,,,27°,40°,95%,3700.40 MHz,
13:42:09,38°,,,27°,40°,85%,3700.40 MHz,
13:42:19,40°,,,27°,40°,95%,3700.40 MHz,

And also my 3dmark score after running:


Quote Originally Posted by TL1000S View Post
Please show some stabilitytest-screenies.. like OCCT.. running..
Just to document anything regarding "temperatures" (coretemp=same for all cores on Phenom=one sensor) and other usages than running CPU-Z.

@dawei213:
Some boards/bios'es do not have a problem booting with an "unknown CPU".
Others again will not boot.
My Gigabyte GA-MA69G-DS3H and MSI DKA790GX boot'ed up fine with X4 920, even with a bios "not supporting" PhenomII.
Flashed.. to get "support" (and CPU "ID String") and more otpions in Bios.. for both mb's.
This is the way it should be. There are no special intsructions in a new model that should stop it from booting in a pin-compatible socket.