Quote Originally Posted by cheapseats View Post
something i just noticed yesterday: particularly bad vCore droop on 1001 BIOS.
Before, I had only run Prime and IBT on 1001 with LLC enabled (500x9) - no vCore issue.
For 450x9 and 450x9.5 without LLC, i get early restarts under load on 1001, using 24hr-tested Prime CPU clocks/vCores (0403 / 0501).

Can Prime ok by raising vCore 3 steps on 1001, so reported droop then stops at 0403 level.

anyone else see this extra droop on 1001 (and maybe 1003) ?

0403 BIOS vcore: 1.256 (set/no LLC) >>>>> 1.23x (cpuz idle) >>>>> 1.208 (CPUz / small FFT load)

1001 BIOS vcore: 1.256 (set/no LLC) >>>>> 1.23x (cpuz idle) >>>>> 1.18x (CPUz / small FFT load)


0403 BIOS vcore: 1.33125 (set/no LLC) >>>>> 1.31x (cpuz idle) >>>>> 1.272 (CPUz / small FFT load)

1001 BIOS vcore: 1.33125 (set/no LLC) >>>>> 1.31x (cpuz idle) >>>>> 1.24x (CPUz / small FFT load)
Yup, using 1003 here and it droops a heck of a lot more even with LLC enabled than the earlier bioses. Funny though, I can do more things with 1003 than I could with 403 through 901.