Wait... I'm confused..
This is a softmod to raise voltage higher then what can be done with the bios mod's?
Say WUT?!? If this works on 4850's I gotta try this out.
Wait... I'm confused..
This is a softmod to raise voltage higher then what can be done with the bios mod's?
Say WUT?!? If this works on 4850's I gotta try this out.
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
Maybe i missed something where do i type those commands in ? rivatuner?
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
Wy not i have hardmodded cards for over 8years so now on to soft mod i dident find any post where it says where to write this in and my english is not the best i am from denmark
The only thing i can find about this is in russian
http://people.overclockers.ru/CoolCmd/record1
Last edited by Riska; 01-25-2009 at 03:25 PM.
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
Originally Posted by Unwinder
RivaTuner's task scheduler module was designed special for such tasks. Go to <Scheduler> tab, click <Add new task> button and type in task name, e.g. "Voltage mod", select <Launch application on specified schedule> task type in %RT% macro as path (RivaTuner will expand it into fully qualified path to itself when executing) and desired I2C writec commands in the command line field then selct desired schedule type, e.g. <Run task at RivaTuner startup>.
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
Returns invalid for all four locations on reference HD4850.
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
Correction: this mod does appear to make a difference in vantage. I thought Vantage originally ran at that higher clock, but confirmed that the mod does allow it to pass all of tests when running without it doesn't. It seems like the mod is only unfriendly to 3dmark06 (out of the two). And possibly maybe only the second test (firefly forest). I'm able to fold at higher clocks and run vantage so far. I'll run 3dmark05 for S's and G's to see what happens. With the mod on or off, I cannot get more than 2 seconds into firefly forest at even 847mhz on the core.
--Matt
My Rig :
Core i5 4570S - ASUS Z87I-DELUXE - 16GB Mushkin Blackline DDR3-2400 - 256GB Plextor M5 Pro Xtreme
My Rig :
Core i5 4570S - ASUS Z87I-DELUXE - 16GB Mushkin Blackline DDR3-2400 - 256GB Plextor M5 Pro Xtreme
Matt - mod for slightly higher voltage, you can set it to whatever you want.
[SIGPIC][/SIGPIC]Bring... bring the amber lamps.
Invalid
Last edited by drizzt5; 01-26-2009 at 10:39 AM.
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
Has anyone tried these on G92 based cards?
You can also insert the commands in a desktop icon target-field, after the last quotation mark (").
For example;
This will scan buses 0-3 when you launch the desktop icon.Code:"D:\Program Files\Utilities\RivaTuner\RivaTuner.exe" /ri0,70,1A, /ri1,70,1A, /ri2,70,1A, /ri3,70,1A
Doesn't work on reference G92GTS.
PX3544 supports I²C but I reckon the addresses are not correct.
Last edited by largon; 01-26-2009 at 03:45 AM.
You were not supposed to see this.
Does anybody have some info or guess if this could work on 9800GX2...?
bypasses ovp/ocp ? i want to see results !
ISL6327 (GTX285) support ?
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
Nope.
Datasheet has been posted though (somewhere in the EVGA Voltage Tuner thread on news forums) - so in case you are able to read it (I unfortunately am not able to do so) correctly, you might find out what registers/adresses are the appropriate ones to be programmed.
Maybe this thread needs a title change. It worked on mine but only two of the commands returned invalid, not really sure what this means.
not all 4870s i think,there was a post from one other guy who couldn't use it on his 4870.only cards with the specified IC or one which show voltage readings by enabling VT1103 plugin can be used.
i tried enabling all plugins but none would work for voltage read out so stuck with pencil mod.
This has no effect on OCP. It is still a problem. That is, if it manifests in the first place.
But yep, software VID mod cannot trigger an OVP.
ISL6327, simply, features no I²C bus interface. Meaning this softmod will never work with cards with that chip.ISL6327 (GTX285) support ?
You were not supposed to see this.
Bookmarks