Its Ø60X165mm full kobber, and 2.3kilo
Ø45 hole is 105mm deep, and 9 Ø9mm holes are 45mm from the bottom of Ø45
Its Ø60X165mm full kobber, and 2.3kilo
Ø45 hole is 105mm deep, and 9 Ø9mm holes are 45mm from the bottom of Ø45
OCTeamDenmark.Com
wow very nice
Case: Corsair 400R
PSU: Corsair HX1000W
mobo: Maximus IV Gene
CPU: 2500K @ 4.2ghz 1.19 volts
RAM: Gskill Ripjaws 1866mhz 2 x 4 gigs
OS Drive: Kingston Hyper X ssd 120 gig
Graphics: XFX HD5850
Cooling: Corsair H100
OS: Windows 7 Pro 64 bit
It looks very nice... When you'll test it?
Very shiny! when you going to get it wet w/ LN2?
cant wait to see the results from that monster
"If It Doesn't Overclock Its Broken"
"NexGen Overclocking"
"Overclocking, its a life style"
Im hope next week, if the hardware arrives in time
OCTeamDenmark.Com
Monster!
Jesus, even those shavings from milling are worth quite a lot
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
I lost almost half the weight making it
OCTeamDenmark.Com
Ouch, what do you pay per KG of copper?Originally Posted by Nanok
I lost almost half the weight making it
I hope you can get some $ back from scraps
"If It Doesn't Overclock Its Broken"
"NexGen Overclocking"
"Overclocking, its a life style"
wow.
That is going to be REALLY annoying to handle.
My solid cu pot weighs about the same, and it takes like 30min to pull back from CB.
A heagun wil reduce that time
Very nice lookin pot Nanok, looking forward to your results
Pret-ty!!!
While waiting the results, do you have any pics of making this POT?
And how much you spent on it?
Very nice, but how do you mount it?
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
I was wondering this as well
Mounting from the top, i will post some pic. when i come home.
OCTeamDenmark.Com
That's a Beauty. Reminds me of Vigor' stuff from a few years ago.
some more pic. with mounting piece .
Last edited by Nanok; 02-10-2009 at 06:26 PM.
OCTeamDenmark.Com
which of These pots is best for dice? Is the pot you mentioned one of these?
And ttyl means talk to you later
e8600: 6261 mhz (LN2)
e8500: 5830 mhz (dice)
It's really unfeasible, unpractical, and for all intensive purposes... SHOULD NONE THE LESS BE ATTEMPTED!
really interest to see how much temp you get with the enzotech base pot there nanok ?...is it only good with DI bench
nice idea there...
Only good for dice, load temp did not go below -69/-70 @5.5 in 3dmark06 cpu test.
Tryed ln2 3D but the temp was all over the place.
OCTeamDenmark.Com
I havent played with Ln2 so im curious how did those temperatures bounce? What cpu you used and what temperature you aimed at? I can understand that temperature would be very hard to control with such container if you aim at -130c but im what im curious about is that does that kind of high surface-area and thin bottom container bounce and raise temps also if container is full of Ln2 all the time? (like if you tried to oc Phenom2 wiht no coldbug)
Nice containers there btw
havet tryed cpu with no cold bug, but i dont think it will hold load temp that good.
Maybe good with old celron/p4 cpu to bench cpu-z thoug.
OCTeamDenmark.Com
Posting Permissions
Reply With Quote
Bookmarks