Took my Q6600 to new heights!

**dan7777** · 01-21-2009, 05:35 AM

Originally Posted by KELL5

P35 is a crackin' chipset for quads

what cooling you got mate? and what temps you runnin' at load? Do you know the vid of your cpu?

Hi, there mate yeah got sythe mine cooler 3.8 idles 36 load 63 v/core 1.5 cheers man for msg.

got few fans in case mounted on cooler push pull fans mounted over pwr and over ram.

**mr-rob** · 01-21-2009, 06:18 AM

@KELL5:

I canno't bench @9x470. I'll give a try when I'll finish my RIG

Nice Vcore & RAM setting

Only a screen for me

:

@dan7777: For the Vcore, it depends on what your Q6600 is capable of...
I need less than 1.35v (bios) for 3.6Ghz & +/-1.50v (bios) for 4.0Ghz
& BTW, keep it cool, Q6600 can get really hot

**~~KELL5~~** · 01-21-2009, 09:34 AM

cheers Mr.rob

what's the aquasuite app you have there?

**yankcrime** · 01-21-2009, 09:59 AM

damn what are your vids?

mines absurdly high can't get past 3.4 without getting into upper 60's with a true 120

**~~KELL5~~** · 01-21-2009, 10:18 AM

1.2350v vid here

**xdrift0rx** · 01-21-2009, 10:37 AM

here's my vid, temps and other small odds and ends.

i should have a new cpu block sometime this week, and hopefully my pa 120.3 will come in...(if you guys didnt know, NCIX has them for like 80$ right now or something!)

**mr-rob** · 01-21-2009, 11:33 AM

@KELL5: Aquasuite is the main prog that control my Aquaero.

My VID is 1.2250v December 2007
@1.088v, 2.970Ghz

@xdrift0rx: I love your wallpaper :d:d:d
If you want some exclusive info about my futur case: http://www.nokytech.net/forum/waterc...-_-117725.html
(I'll do a worklog here soon

)

**-Acid-** · 01-21-2009, 06:19 PM

mr rob i,m on phase cooling (modded vapochill ls)
the vid of my chip is 1.2875v

doing a test atm for water cooling people atm to prove you dont need huge rads using a single 120mm rad with 7v 1200x38 delta fhe with my quad 2 volt modded 2900xt's and temps are fine !!!!! below 60 degrees

**dexster** · 01-22-2009, 02:52 AM

wouldnt have a link to the desktop background...

btw nice o/c on air

**xdrift0rx** · 01-22-2009, 04:22 AM

It's not on air, the only reason there is a cpu fan there is becasue i plug in a fan on that header to cool my northbridge :P it was the easiest/cleanest solution.

**libertysyclone** · 01-22-2009, 07:58 AM

Drift I am pretty sure that I have a 680i NB waterblock floating around here somewhere, if you want it just PM me and pay shipping. I want to see how far you can push that 680.

It kinda pisses me off that some people get these killer 680i's and I went through 5 bad ones before I cut ties and went P35....

Awesome clocks!

**xdrift0rx** · 01-22-2009, 07:07 PM

well i just tried to see what my lowest voltage is...and......this is what i have.

i think this is fairly decent for minimum voltage. isnt it?

**fatguy1992** · 01-22-2009, 07:14 PM

Very nice

But is it stable?

**~~KELL5~~** · 01-22-2009, 07:50 PM

You guys got me tryin' it now

This is lowest vcore I can get 3800mhz to pass fritz

I'm gonna try a new NB cooler in a day or so.

**fatguy1992** · 01-22-2009, 11:08 PM

@ KELL5

1.328v @ 3.8GHz

chew* · 01-23-2009, 12:08 AM

Note VID

**fatguy1992** · 01-23-2009, 01:03 AM

Is that 1.304vcore and the VID is 1.225v?

Can't really read it easy.

chew* · 01-23-2009, 01:05 AM

Originally Posted by fatguy1992

Is that 1.304vcore and the VID is 1.225v?

Can't really read it easy.

Yes thats correct. sorry screenshots from a 1920x1080P resized ( my tv ) My 24/7 OC

How about some all on air single card 3d stable ownage

Not optimized/no Lod tweaks ( still need to load my special bios, I ran outa ram clocks )

http://service.futuremark.com/compare?3dm06=9627529

**joker_x3** · 01-23-2009, 01:21 AM

hm nice results,
i pushed up my Q66 to 4500 MHz
http://valid.canardpc.com/show_oc.php?id=482464

**jasonelmore** · 01-23-2009, 01:22 AM

Originally Posted by joker_x3

hm nice results,
i pushed up my Q66 to 4500 MHz
http://valid.canardpc.com/show_oc.php?id=482464

Nasty overclock.. only if that was stable. haha

**joker_x3** · 01-23-2009, 01:24 AM

with 4325 MHz
it was quite stable

4500 was only for cpu-z :-D

**strange|ife** · 01-23-2009, 01:38 AM

nice work. Best I was able to do was 4.1 or so when I first week I had my Q6600. Just super pi single thread stable at that clock, with loads of voltage. Air temps was room temp.

these are good chips, but you have hit you're max, unless you get some crazy ln2 or what not.

mine just hums along at 450x9..it's fine for my needs...

**joker_x3** · 01-23-2009, 01:50 AM

i stresst my cpu under dice :-D
so it was quite easy, but i cant go higher cause of my ram -_-
it was only ddr2-800, they wasnt enbaled to get more than 500MHz ...
When i have dice for the next time i will have ddr2-1066, too :-P

**fatguy1992** · 01-23-2009, 01:50 AM

Originally Posted by joker_x3

hm nice results,
i pushed up my Q66 to 4500 MHz
http://valid.canardpc.com/show_oc.php?id=482464

Awesome

What cooling?

Edit: Just read ur later post.

@Chew*

Heres my best 3D Mark 06 with a single 4870. My 4870 doesn't overclock as good as yours

.

Once my Phase arrives i'll be able to run like 4.2GHz+.

**joker_x3** · 01-23-2009, 02:02 AM

this is my best 3dm06 score with Q66
an a none Oced GTX 260 216sp

if time comes, new ram comes

and then im able to push it higher

Thread: Took my Q6600 to new heights!

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions