DFI LP UT X58-T3EH8 - First bench, bios screens etc

[eva2000]

Yeah jcool will retest with HT and see what diff it has heh

I am now testing my new board and had some problems with it. With the latest bios it wouldn boot from my ssd's in raid. That problems is solved with 0106 beta bios. Now my CPU isnt stable anymore at 4.2GHZ. Before i owned a Gigabyte mobo and my CPU ran 4200mhz 1.39v small FFT. Now i can do 19x200, 20x200 1.35v but 4200mhz just freezes my pc. Even at 1.44v! Also in CPU Z i see that the multi jumps from 21 to 20,5!! I did the 21X trick as EVA2000 explained in the start post. I also tried to bump any voltage: CPU VTT/ ICH/ IOH. Perhaps i forgot something??? Anyone tips to gain back my 4200 mhz stable CPU?

for vista the power saving profile needs to be set to high/max performance and not power saving for cpu multi to stick

hello,

is there any solution for me for the hot pwm problem if i´m overclocking and run prime.? i have about 70°C after 1 hour. and i use watercool.

fan over NB and PWM area will do and dropped my PWM from 70s C to mid 50C under load!

[eva2000]

DFI UT X58-T3EH8 users updating to 01/14 beta NEED to read this important note especially if you use the ABS profile system application and incorrectly loaded older bios based version profiles on a newly updated bios based board and have laggy mouse and usb/floppy bios flashing experience > http://i4memory.com/f80/dfi-ut-x58-t...eleased-13876/

[Nilos]

for vista the power saving profile needs to be set to high/max performance and not power saving for cpu multi to stick



i set it to high/max but multi keeps flipping in CPU-z 21/20.5/20. Strange. That happens only when i fully load the cpu with prime95.

[rusty]

I can't get my gtx280 to work on this board I get FF code I tried to resit several times already.
p.s I tried 7600gt and it works in pcie 1 but gtx280 won't. I tried gtx280 in pcie3 and it works.
p.s.s. Seemed to fix it by taking the battery out and resetting rtcp.

[vega22]

My GTX280 works fine in DFI first slot, except in shutdown o reset from windows xp x64 sp2 (bios 106). The issue is solved setting all Pcie root ports to Disable (advanced bios settings) except the pcie port where the vga is placed. Try this.

[eva2000]

with high end gpus play with memory lowgap in bios #11 at http://i4memory.com/102537-post3.html

[rusty]

My GTX280 works fine in DFI first slot, except in shutdown o reset from windows xp x64 sp2 (bios 106). The issue is solved setting all Pcie root ports to Disable (advanced bios settings) except the pcie port where the vga is placed. Try this.

I'll try now cause I thought I solved but no it happened again

[rusty]

with high end gpus play with memory lowgap in bios #11 at http://i4memory.com/102537-post3.html

what do you think I should extend it to ?

[eva2000]

what do you think I should extend it to ?

try between 1536 and 2176 values and see..

you can install both working video card and gtx 280 and if you have lcd monitor have one card dvi input and other analog and boot using working card and switch outputs to confirm if gtx 280 is working (well if you get black screens)

[rusty]

try between 1536 and 2176 values and see..

you can install both working video card and gtx 280 and if you have lcd monitor have one card dvi input and other analog and boot using working card and switch outputs to confirm if gtx 280 is working (well if you get black screens)

so only extending ? what if I go to 1024 ?

[vega22]

with high end gpus play with memory lowgap in bios #11 at http://i4memory.com/102537-post3.html

Never worked for my GTX280 the trick of lowgap. The pcie root trick works like a charm.

[eva2000]

well i don't have a gtx 280, so maybe follow vega's suggestion heh

[vega22]

well i don't have a gtx 280, so maybe follow vega's suggestion heh

the beauty of pure logic hehe

BTW, I am curious to know whether the shutdown/restart problem in xp x64 is related only to the GTX280 or is general...

[eva2000]

the beauty of pure logic hehe

BTW, I am curious to know whether the shutdown/restart problem in xp x64 is related only to the GTX280 or is general...

what problem ? please explain as i've never experienced such

[vega22]

Ah, i thought you already knew this, eva. I already have post this issue in DFI forum.
When i install Windows XP x64 (SP2) in my rig, everything is fine until i try shutdown or reset the system. Shutdown -> power on leads to 88 code, board dead. Reset leads to system hangs, FF code and blank screen. Only reset cmos with jumper or unplug and replug the PSU wire restore the system. The workaround that solve this problem is play with pcie roots settings.

[rusty]

Ah, i thought you already knew this, eva. I already have post this issue in DFI forum.
When i install Windows XP x64 (SP2) in my rig, everything is fine until i try shutdown or reset the system. Shutdown -> power on leads to 88 code, board dead. Reset leads to system hangs, FF code and blank screen. Only reset cmos with jumper or unplug and replug the PSU wire restore the system. The workaround that solve this problem is play with pcie roots settings.

do you set your pcie 1 to auto or enabled ?
man it's driving me nuts already I get the damn blank screen and FF code. I've tried the solutions you guys told me but it last for a couple of boots and then again FF and blank screen.
Could it be the bios ?

[rusty]

hey vega22 what bios version do you use ?

[Viss]

Trying to update bios with USB and DFI Club commands. AWDFlash keeps asking "Please input file name" although its same Enter doesnt help Other commands needed ?

[vega22]

do you set your pcie 1 to auto or enabled ?
man it's driving me nuts already I get the damn blank screen and FF code. I've tried the solutions you guys told me but it last for a couple of boots and then again FF and blank screen.
Could it be the bios ?

Pcie1 to AUTO. Bios 106.
(Right now installing my 2º board (rev. a156). Sensor voltage seems ok )

[vega22]

DiamondFlash Image for BIOS is working for 114? The flashing process with my floppy has stopped just before the cheksum. I had to make a dangerous hard restart . Fortunately the Bios has not been corrupted. Flashing with the pendrive method is ok.

[RNeon]

Yeah jcool will retest with HT and see what diff it has heh

for vista the power saving profile needs to be set to high/max performance and not power saving for cpu multi to stick



fan over NB and PWM area will do and dropped my PWM from 70s C to mid 50C under load!

thank you for help. i have tried with a 120mm fan and my temps go down from 70° to 53°C under load. but i don´t know how i can fix the fan in the near. maybe someone have pics?

[rusty]

Trying to update bios with USB and DFI Club commands. AWDFlash keeps asking "Please input file name" although its same Enter doesnt help Other commands needed ?

same here, you need let it hang like that for 12-20 minutes or more it takes forever and then it flashes

[Viss]

Hope this is the solution, wil try tomorrow morning:

http://csd.dficlub.org/forum/showpos...&postcount=158

[rusty]

Pcie1 to AUTO. Bios 106.
(Right now installing my 2º board (rev. a156). Sensor voltage seems ok )

where do you see the board revision? what about blank screen ? do you still get ?

[Grinch]

Other than these:

Corsair
DDR III 1333
DDR III 1333 Corsair 2048 Corsair CM3X2048-1333C9DHX Double
DDR III 1333 Corsair 1024 Corsair CM3X1024-1333C9 Single

DDR III 1600
DDR III 1600 Corsair 2048 Corsair CM3X2048-1600C9DHX Double
DDR III 1600 Corsair 2048 Corsair CM3X2048-1600C7DHX Double
DDR III 1600 Corsair 2048 Corsair XM3X2048-1600C7DHXIN Double

DDR III 1800
DDR III 1800 Corsair 1024 Corsair CM3X1024-1800C7D Single

G.SKILL

DDR III 1066
DDR III 1066 G.SKILL 1024 G.SKILL F3-8500CL6D-2GBHK Single
DDR III 1066 G.SKILL 1024 G.SKILL F3-8500CL7D-2GBNQ Single

DDR III 1333
DDR III 1333 G.SKILL 1024 G.SKILL F3-10600CL9D-2GBNQ Single
DDR III 1333 G.SKILL 2048 G.SKILL F3-10600CL8D-4GBHK Double
DDR III 1333 G.SKILL 1024 G.SKILL F3-10600CL9D-2GBPK Single
DDR III 1333 G.SKILL 2048 G.SKILL F3-10600CL9D-4GBPK Double
DDR III 1333 G.SKILL 1024 G.SKILL F3-1066CL8D-2GBHK Single
DDR III 1333 G.SKILL 2048 G.SKILL F3-10600CL9D-4GBNQ Double
DDR III 1333 G.SKILL 1024 G.SKILL F3-10600CL7D-2GBPI Single

DDR III 1600
DDR III 1600 G.SKILL 1024 G.SKILL F3-12800CL9D-2GBNQ Single

Kingston

DDR III 1625
DDR III 1625 Hyper 1024 Kingston KHX13000D3LL/1G Single
DDR III 1625 Hyper 1024 Kingston KHX130003LLK2/2GX Single

DDR III 1800
DDR III 1800 Hyper 1024 Kingston KHX14400D3K2/2G Single

OCZ

DDR III 1600
DDR III 1600 OCZ 1024 OCZ OCZ3FXT20002GK Single
DDR III 1600 OCZ 2048 OCZ OCZ3P20004GK Double
DDR III 1600 OCZ 1024 OCZ OCZ3P16002GK Single

PATRIOT

DDR III 1333
DDR III 1333 PATRIOT 1024 PATRIOT PVS32G1333LLK Single
DDR III 1333 PATRIOT 2048 PATRIOT PVS34G1333LLK Double

DDR III 1600
DDR III 1600 PATRIOT 2048 PATRIOT PVS34G1600LLK Double
DDR III 1600 PATRIOT 1024 PATRIOT PVS32G1600LLK Single

DDR III 1800
DDR III 1800 PATRIOT 1024 PATRIOT PVS32G1800LLK Single

PQI

DDR III 1600
DDR III 1600 PQI 2048 PQI PQI312800-4096DB Double

what other types..brands...speeds are people using with no issues at all?