Gigabyte GA-MA790GP-DS4H BIOS versions

[Meizuman]

well i've got my NB @ 2410mhz (200.9 x 12, +.050v ) but anything over that doesn't boot...which is what i meant by not being able to break 2400mhz.
13x multi refuses to POST no matter what voltage i set on the CPU NB VID - +075v, +.100v or even +.125v...i think i might of even tried +.150v w/ 13x

bus speed increases w/ a 12x multi on the NB to put it over 2400mhz fail as well.


as for the EPP
right now, cpu-z shows 500mhz 5-5-5-12 for EPP#1
if i auto set RAM in the BIOS and switch to EPP and set to auto it boots 400mhz 5-4-4-10
as well it reports max bandwidth is pc2-6400 instead of 8000
i dunno, i might be a noob and missing something logical here. i've never ran these at 1066 until last week when i got my pII. just had a 5000+BE temporarily waiting for this cpu to be released.

It is not possible to run with x13 multi. You have do it with x12 and increase HTT. I think the limit is somewhere in the 2500MHz area...

EDIT:
You can be happy with 2400MHz. You wouldn't gain any noticeable performance with higher speeds... I still would suggest a slight increase for NB and CPU NB voltages... But if it feels stable, then no use for overvolting.

Do you get a x5.00 option for RAM multi with those sticks? Btw, this review suggests that they should run at about 560MHz with default volts...