Quote Originally Posted by The-Fox View Post


I kind of have the same issue only at different speeds.
I can run my CPU (x21 multi) with DDR 1800-1850 Mhz-> bClk 180-185Mhz with DRAM multi x10 benchable.
But it won't do even lower dram speeds at high CPU speeds, I couldn't pass 215 bClk with x21 CPU multi and x8 Dram multi which results in 1720 Mhz.
I tried to relax timings and raise QPI/VTT voltage to a high degree of 1.65v but none of this helped.
It was very frustrating as I could run higher CPU speeds (221blck x 21 CPU multi) at x6 Dram benchable.

I concluded that my IMC just can't run high DRAM speeds at high CPU speeds.
So you are saying that my 940 might run higher dram speeds if I go down on the clock? Might be.. I tried at stock clocks and got a no post using the 12x ram mult, after having to remove CMOS battery again I was fed up trying and just fired it up at 4,4Ghz again
I mean it's fine, I don't really need more bandwidth than Tri-Channel DDR3 at 1200Mhz gives, but I feel kinda stupid running 2000Mhz Diablos in there while a cheap-ass set of 1333 whould do just fine