So far nothing - lockup or reboot, all day long. Now i decided to do this - i set FSB to 470 and multi to 6x and start to lower all the voltages. Of course, it lockup while booting windows, what isn't new. The first repeatable sing, that i found is that i lockups just before entering LogOn screen, when 3 green light on the keyboard are flashing all 3 at a time. Lowering voltages doesn't make it lockup earlyer or later. So far i'm at 1.28 vCPU, 1.41 vNB, 1.5 CPU PLL, 1.3 VTT and going down. GTLs are 65x for CPU and 67x for NB.
So, i didn't do anything with finding max FSB and then testing the cpu. I'll set all voltages to minimum, 333x8.5 and i'll rising 10mhz at i time and 1 step on required voltages at a time. That's all i can do ...
Question - how to set GTLs just to be sure, that they aren't too high? From testing so far 65x on the CPU and 67x on the NB give the most stability, but since now i'll be going from down to up, may be i need to set them to min available values - 62x CPU GTL and 52x NB GTL? Any help here?
Reply With Quote
Bookmarks