Results 1 to 25 of 4313

Thread: UnOfficial Asus Rampage II Extreme Thread

Threaded View

  1. #10
    Registered User
    Join Date
    Mar 2007
    Posts
    45
    CPU Clock Speed 4095 Mhz
    Asus 4870x2 at stock speeds 750/900
    3DMark Vantage P16819 / Cpu-25028 / Gpu-15162
    Bios Version : 903
    ----------------------------------------------
    AI overclock - manual
    OC from CPU level up - auto
    OC from Memory level up - auto
    CPU Ratio setting - 21
    CPU configuration 21
    CPU Ratio Setting - auto
    C1E Support - disable
    Hardware prefetcher - enable
    Adjacent Cache line prefetcher - enable
    Intel Virtualization tech - disabled
    CPU TM Function - disable
    Execute Disabled bit - disabled
    Intel HT Technology - enable
    Active Processor Cores - all
    A20M - disabled
    Intel Speedstep tech - disabled
    Intel Turbo Mode tech -disabled
    Intel C-STATE tech - disabled

    BCLK frequency - 195
    PCIE frequency - 100
    DRAM frequency - 1564
    UCLK frequency - 3127
    QPI frequency - auto
    Dram timing control
    1st iformation - 8-8-8-24 - 1T
    2nd information - auto
    3rd information - auto

    EPU II phase control - full phase
    Load-line calibration - enable
    CPU differential amplitude - auto
    Extreme OV - disabled

    Current voltage
    Cpu voltage - 1.45
    CPU PLL voltage - 1.81592
    QPI-Dram voltage - 1.375

    Current voltage
    IOH voltage - auto
    IOH PCIE voltage - auto
    ICH voltage- auto
    ICH PCIE voltage - auto

    Current voltage 1.674
    DRAM Bus voltage - auto
    DRAM REF voltage - auto

    Debug mode - string
    Keyboard TeakIt control -disabled

    CPU spread spectrum - disabled
    PCIE spectrum - disabled
    CPU clock skew - auto
    IOH clock skew - auto

    Notes: I can run @ 4.2ghz with H.T. on but Vantage and prime 95 fails. With H.T. off Vantage and prime 95 passes. (Max 58c / Min 30c idle H.T. on)
    However the Vantage score is lower by 700pts than @ 4095 mhz with H.T. enabled.
    Last edited by glenn37216; 01-14-2009 at 07:20 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •