The Phenom II List of Overclocks

[topdog]

PhenomII 940 3600Mhz 200 X 18
Stepping CACVC AC 0850BPEW
Voltage 1.42
Windows Vista x64
Zalman CNPS9500

[HondaGuy]

I'm going to start the install in about 20 minutes, need to wait for my 2 hours of prime to finish. I really wish my network plug hadn't died at the wall, cause now I actually need a wireless card until I get it fixed.

By the way, has anyone noticed a newer version of aod than 2.1.5 yet?

Nuttn yet on my end

[topdog]

Valid at 4Ghz on Air

http://valid.canardpc.com/show_oc.php?id=483276

[LowRun]

Valid at 4Ghz on Air

http://valid.canardpc.com/show_oc.php?id=483276

http://img.photobucket.com/albums/v1...screenshot.jpg

Voltages please

[topdog]

Voltages please

CPU Vcore was at 1.5v

[faior]

CACVC AC 0849CPAW and 3.8GHz @1.475Vcore, NB2820MHz, HTT 282, HT-link 2250MHz 24/7 stable with TRUE 120, load temps around 50C and idle 35C

mobo Asus M3A79-T Deluxe with one dead PCI-E slot .. also my HD4850 crapped itself because the heat(fan wasnt running in the bios and i did notice it a bit too late all sorts of nice artifacts popping here and there), now Ive got an 4870 512MB (790/1150MHz 24/7) And 3Dmark 2006 result 17100, CPU 5670 winxp, 2x2GB DDR2 1130MHz.

And hell yeah theres a big performance gain compared to 9950BE@3.1GHz.. all the games are running much better now.

Though the CPU cant do much better than that.. even for suicide shot, like not booting at 3.95GHz and above, no matter what voltage. BSODs immediately in windows load screen. .. also why my mobo says "CPU Voltage error" when I try 1.6V or above?

[LowRun]

CPU Vcore was at 1.5v

Thanks, good going there

[roofsniper]

hey topdog whats your ambient? i have the same cooler as you and when i get my 940 soon i will be shooting for about a 3.5ghz overclock.

[Caveman787]

TopDog looks like you got a good one.

Faior nice northbridge clock.

Anyone been able to get high hypertransport like 2400+?

I've heard it increases gaming performance.

[faior]

TopDog looks like you got a good one.

Faior nice northbridge clock.

Anyone been able to get high hypertransport like 2400+?

I've heard it increases gaming performance.

Rock solid, Ive noticed that too high HT-speed causes rebooting under load :/ same effect was there with 9950BE(though now the limit is higher).

High NB-speed increases memory speed like hell(IMC running faster?), now the speed with my clocks is very near of the latencies of DDR1@240MHz 1T-6-3-3-2.5CL settings, not bad at all. 44ns. Though the other speeds are in their own categories ;D

[topdog]

hey topdog whats your ambient? i have the same cooler as you and when i get my 940 soon i will be shooting for about a 3.5ghz overclock.

Ambient is 18C
3.5ghz will be a walk in the park for you.

[fizur2002]

topdog, how is that board doing for you with your new phenom?

[roofsniper]

Ambient is 18C
3.5ghz will be a walk in the park for you.

yea im hoping i can get 3.5ghz on stock voltage but id most likely need a good chip for that. your ambient is much better than mine. right now my room temp is 23C and thats actually pretty low and case temp is 30C.

[fizur2002]

so going for 3.5/3.6 can both the 920 and 940 hit that speed pretty easy?

[topdog]

topdog, how is that board doing for you with your new phenom?

I like it, I had an ASUS M2N32-SLI Deluxe with a 6400 X2 before and I'm just getting used to the DFI BIOS, I've just updated from the Bios that was shipped with it so I will now be able to adjust the HT link which was locked on the original.

[demonkevy666]

CACVC AC 0849CPAW and 3.8GHz @1.475Vcore, NB2820MHz, HTT 282, HT-link 2250MHz 24/7 stable with TRUE 120, load temps around 50C and idle 35C

mobo Asus M3A79-T Deluxe with one dead PCI-E slot .. also my HD4850 crapped itself because the heat(fan wasnt running in the bios and i did notice it a bit too late all sorts of nice artifacts popping here and there), now Ive got an 4870 512MB (790/1150MHz 24/7) And 3Dmark 2006 result 17100, CPU 5670 winxp, 2x2GB DDR2 1130MHz.

And hell yeah theres a big performance gain compared to 9950BE@3.1GHz.. all the games are running much better now.

Though the CPU cant do much better than that.. even for suicide shot, like not booting at 3.95GHz and above, no matter what voltage. BSODs immediately in windows load screen. .. also why my mobo says "CPU Voltage error" when I try 1.6V or above?

go to power and go to the cpu volts and put ignore for the cpu over volt.

[pershoot]

I like it, I had an ASUS M2N32-SLI Deluxe with a 6400 X2 before and I'm just getting used to the DFI BIOS, I've just updated from the Bios that was shipped with it so I will now be able to adjust the HT link which was locked on the original.

HT link upward doesn't work with phenom II and with Phenom I on the DFI board. max 1.8 upward adjustable for phenom II and max 2.0 upward adjustable for I.

[roofsniper]

wooooo just got my phenom II and its pretty fresh. ill post numbers if i can.

[Blacklash]

Anyone got better than four hours of prime with their OC? I can't do more than 2 hours @ 3.7GHz on my Ph II 940.

[topdog]

HT link upward doesn't work with phenom II and with Phenom I on the DFI board. max 1.8 upward adjustable for phenom II and max 2.0 upward adjustable for I.

Sorry I meant the NB Multiplier

[MadDias]

Anyone got better than four hours of prime with their OC? I can't do more than 2 hours @ 3.7GHz on my Ph II 940.

i did 3hrs of prime (screenshot in the link in my sig) and i´m sure it would have run even longer if i didn´t stop it.

[2good4you]

Windows 7 Beta ATI drivers: AOD not working this Windows 7

http://support.ati.com/ics/support/d...estionID=39069

I've made a modded version so yes it works. Here you go:

(French upload site, just click "telecharger")

http://www.partage-facile.com/151633...oddad.msi.html

This will also work on Server 2003 and Server 2008.

[keithlm]

wooooo just got my phenom II and its pretty fresh. ill post numbers if i can.

Dang it... I have to wait until tomorrow to get my fedex...

(NOTE: I couldn't order until this morning because I was out snorkeling in the Caribean Sea and cruising around for the last week... and imbibing the local beverage of choice. Ah the tragedy...)

DOUBLE DANG IT... just realized car insurance is due this month... so I have to wait to buy my Danger Den case and water cooling with their 4x120 radiator. And I even decided to pay the extra $50.00 for color in the plexiglas.

(I think I've talked myself into it for sure. Just have to hide the price from the wife.)

[fizur2002]

(I think I've talked myself into it for sure. Just have to hide the price from the wife.)

That my friend, is the single most dangerous thing a man can do.

[iandh]

yea im hoping i can get 3.5ghz on stock voltage but id most likely need a good chip for that. your ambient is much better than mine. right now my room temp is 23C and thats actually pretty low and case temp is 30C.

I was able to do 3.4 on stock volts but it took 1.375 for 3.5