So I have few questions that I seem not to be able to find answeres too:

1 - How do you determine VID?

2 - I have the EVGA board and I7 920. The first day with defaults (except for Raid turned on and Intel PWR saving turned off) and with stock cooling, the board automatically put my vcore at 1.25v. After installing my water cooling and not changing anything in the BIOS, the board put the vcore at 1.16v. Any ideas on that? Same BIOS by the way, literally, the only thing changed was the cooling.

3 - I have Corsair TR3X6G1333C9, 3x 2Gb 1333 Ram. If I set my Bus Speed to 170 do I set my divider at 2:6 or 2:8? On EVGA's forums Jacob states that the uncore frequency has to be exactly twice the memory multiplier. If I put it at 2:6, then the uncor freq would need to be 12, which is not an option. If I put it at 16, then they do not match. I am just trying to figure this part out as there is a lot more to do than there was with 775 chips. And I am just using 170 as an example.

Thanks