Hmm.....Originally Posted by bodka
FSB 333, multi x12
DRAM timings 3-3-3-8-3
vMCH 1.65v (didn't seem to make any difference from 1.55)
Dram voltage 2.1v (2.05v if using my gskills but 1 stick is dying; needs 2.3v to post but then runs at lower voltages after POST; Corsair XMS needs 2.1v to be cas 3 stable at 333 fsb and 2.15v for 340 FSB at cas 3).
CPU vdroop pencil mod applied.
CPU vcore 1.375v (not 100% prime stable over several hours; sometimes does a full 3.25 hour small FFT prime run complete pass (8k-64k), sometimes errors out on one core after like 2 hours; i do NOT want to run prime 12 hours and raise the heat and stress my CPU even more; if it doesn't crash in games that's fine). I consider this to be fully stable as nothing can make the CPUs reach 71C except quad prime.
Rybka multiprocessor Chess engine (4 threads) stable.
Vcore 1.3875v runs prime just fine but gets WAY too hot; I stopped it as soon as temps got to 80C; Tuniq tower 120 simply has trouble dealing with 4 cores giving off this much heat, plus nothing is lapped. Linpack makes things get so hot that the entire system just freezes (1 test with 5 loops is fine but do a 2nd test and boom...; Got up to 88C....followed by the absolute WORST horrible screeching sound you've EVER hard in your life, coming from the speakers (even if I set the volume to 10%); i think it startled some apartment neighbors at 1 am in the morning...it was THAT bad.
4.1 ghz @ 1.4v bios (1.392v loaded) runs Rybka chess 4 threads, and 3dmark 2006 as many times as I need it to; seems game stable but I need to run a lot more games; don't ask me to prime at this voltage; pretty obvious it won't pass that; may need a TRUE Black 120 for that.....
FSB 315, multi x13 for this.
Reply With Quote
Bookmarks