Silver KillCoils by iandh available at Petra Tech Shop

[usf09]

You got it correct!

Thanks very much sir, now we play the waiting game...

But...question here...I was planning on using some sort of anti-corrosion fluid with distilled water, can I still use this with the silver piece in there?

[Metal]

I decided I would need the silver in time for my coming rebuild so I went looking. I was looking for silver wire. I go to ebay and find plenty o silver. A very shiny (Bitspower shiny!) perfectly molded (like a little bar of soap) chunk, stamped for authenticity and weight caught my eye. A whole Troy oz. of .999 silver could be mine for $9.29! Wow, $9.29! If I can only snipe this baby 2 secs. before bidding ends. I'd just confirmed my bid when it struck me, "maybe $9.29 for 1 Troy oz. of .999 silver isn't going to land me on the cover of Fortune magazine as "the Guru of silver trading"". That's what I get for my total ignorance of the silver market. I didn't overpay but, I just thought silver was worth a little more than it is. I think I caught "gold fever". Thankfully it was only for silver ($10 worth).
Anyway, I had actually wanted silver "wire" because I do not have anywhere to place a hunk of silver in my loop. Here, I give you, the point of my story- I found some good silver wire. Google "Atlasnova", they have 10 and 12 gauge .9999 wire. I only suggest this if you need it now. Otherwise, I would hang on for Petra's to re-up (support supportive businesses), it's much prettier all flat like that. I may hammer mine flat I don't know. I'm really not sure where I'm going to put it. My mcres only has a hole as big as the hole my flow will ultimately exit through. I'm not sure how to bend my wire so it won't block outward flow and still fit into the res through the same size hole. I like the placement in the tubing but, I have spent too much time in XS to not consider the sin of elective added restriction. Oh well, Einstein wouldn't have given up, I shall solve this problem... and maybe others too.

Your restriction will be minimal at best if you place the wire coil in the return line just before the pump or in your dump to the res it won't even matter that it's there. Since when did you see restriction when a res is concerned? Long as there is flow over the silver your set to go.

Thanks very much sir, now we play the waiting game...

But...question here...I was planning on using some sort of anti-corrosion fluid with distilled water, can I still use this with the silver piece in there?

Can't see a problem with that.

[usf09]

great thanks...now we really play the waiting game...argh...

[eligray]

great thanks...now we really play the waiting game...argh...

The waiting game sucks, let's play hungry hungry hippos!

(simpsons reference)

[003]

Thanks very much sir, now we play the waiting game...

But...question here...I was planning on using some sort of anti-corrosion fluid with distilled water, can I still use this with the silver piece in there?

anti-corrosion fluid works by layering itself evenly over all the metal in the loop and preventing water from contacting the metal. What do you think that implies for the purpose of the silver? And for the temps, for that matter.

You do not need any anti corrosion fluid unless you have aluminum in your loop. Without aluminum, the corrosion will be so minuscule that it would be decades before any visible changes to the metal will show up.

[usf09]

well im using the swiftech apogee gtz...i think that has an aluminum body...im new to WCing so I have no idea what i'm doing...so no go for the anti-corrosion?
'

[Metal]

Find out if it's the copper or Aluminum top first.

[Linchpin]

well im using the swiftech apogee gtz...i think that has an aluminum body...im new to WCing so I have no idea what i'm doing...so no go for the anti-corrosion?
'

No aluminium(not even sure if it's aluminium or steel) comes in contact with the water so you don't any anti-corrosion additives.

[usf09]

Awesome, thanks...hopefully Petra's gets some in a few weeks...I hate waiting for things, its so inconvenient...

[basserdan]

[QUOTE=Metal;3503709]Your restriction will be minimal at best if you place the wire coil in the return line just before the pump or in your dump to the res it won't even matter that it's there. Since when did you see restriction when a res is concerned? Long as there is flow over the silver your set to go.



sounds pretty good

[omaryunus]

still nothing

[evilsponge]

Any updates?

-sponge

[NaeKuh]

No aluminium(not even sure if it's aluminium or steel) comes in contact with the water so you don't any anti-corrosion additives.

copper GTX is copper like so:

You'll get mix'd reviews about the alu.

if you ask me personally i didnt get corrosion, but a close friend of mine did, so i dropped the alu top entirely..

[orangekiwii]

Any update? They still haven't arrived at petra

???

[Durkadurka]

Still nothing at Petra's

[DarthBeavis]

IandH should team with TribalOverkill to make spinner resevoirs with silver spinners . . .

[aspire.comptech]

IandH should team with TribalOverkill to make spinner resevoirs with silver spinners . . .

God would that ever be expensive.

[DarthBeavis]

God would that ever be expensive.

you could embed silver into the acrylic spinners. I think I am going to do just taht

[warriorpoet]

you could embed silver into the acrylic spinners. I think I am going to do just taht

You sshould do an all-out ghetto blingfest just once, DB. Silver spinners, gold tooth 90s, Giant gold-chain tube wrap, diamond-encrusted power switch...

The possibilities are endless!

[orangekiwii]

so is the price

[Maxspam]

You can go to your local coin shop and buy a 99.99% pure bar of silver for like 20-30 bucks...
What makes this any better?

[Vatos_locos]

ok i have read six pages and i still dont understand what this think do ?

[Zehnsucht]

ok i have read six pages and i still dont understand what this think do ?

iandh's KillCoils are approx. 1.3g of pure anti-algae/antimicrobial ass kickery in the form of 0.999 fine silver!

I'm surprised you have not even visited the site.

http://www.petrastechshop.com/sikibyia.html

[Vatos_locos]

ok i had visited the site but i still cant understand what it does maybe the lack of good English but all i see in the site is a description of what it is now what it doese

an what is the propose of placing it on a tank or on a tube ?

[003]

so when the hell will they be in stock again?