Yes, I've seen the video. I was simply wondering about the merits of high multiplyer with low BCLK vs those of low multiplyer with high BCLK.

By the way, I believe I have reached a Prime stable 3.8ghz overclock. It just passed through 4 hours of torture testing with all 8 threads, with a top max of 77c and an average max of 75c.

It is as follows:

CPU Ratio: 19x
BCLK: 200
DRAM: 1203mhz (note to non P6T users: the P6T does frequency rather than multi's)
UCLK: 3208mhz
QPI: 7218MTs
-----------------
CPU Voltage: 1.32v
PLL: 1.84v
QPI Voltage: 1.3375v
DRAM Voltage: 1.6v



This was done with an air cooled (Noctua) 920 on a P6T board using OCZ Platinum DDR3 1333 RAM.