-
I had walked the path of OC with the 4870X2 as well.
I managed to OC it very well I think, both cores benched 3DMARK06 and Vantage @ 880/1080.
The slave core was quite stunning alone and managed to bench @ 907/1125, but when both cores were OCed I had to lower the clocks as it wasn't stable.
I own the Sapphire card, flashed it with the 900/1000 limit using the RBE tool (not the ASUS Top bios).
I tried to raise the voltages to 1.35v, as it uses 1.25v (GPU-Z shows 1.265) in 3D mode, and 1.05v (GPU-Z shows 1.06v) in 2d mode.
Unfortunately that didn't do it and the card was still getting 1.25v, so it appears to have no effect in reality.
I then Overclocked the card using rivatunner, each component at it's own time, meaning GPU#0 memory, GPU#0 Core, GPUE#1 Memory and at last, GPU#1 core.
After all that I gave the card a few runs with 3D 06' and eventually came down to some stable and benchable clocks.
I use the EK block to cool the card, so far it has amazing temps (below 40c) even under OC.
binormalkilla, you need to disable CCC at the startup (use msconfig) as sniiipe suggested.
Otherwise you won't be able to Overclock beyond the bios limit (800/1000), CCC checks for the clocks in realtime and if you go above those clocks you get the card unstable/artifacting.
Last edited by The-Fox; 01-02-2009 at 03:35 PM.
PC: Intel Core i7 920 D0 | Kingston Hyperx T1 6GB 2000Mhz 8-8-8 RAM | Foxconn Bloodrage GTI | Sapphire 4870X2 | Perc 5/i - WD 640AAKSx4 RAID0 | Asus 2014L1T | Dell 2407WFP | Lian Li G70 Silver Watercooled
WaterCooling: Q² Project by The-Fox
CPU Loop: Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4
GPU Loop: EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3

Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks