-
Just curious if anyone else has had simular results in updating the Bios on the UD5 to the latest F4.
When i got my 920i/UD5 on release i could manage 185x21= 3885mhz @ 1.3250v ..... I wont go over this voltage, but no matter what i tried, how low i set the multiplier/uncore etc.. I couldn't get over 185 BLK
Just updated to this F4 Bios.. bloomin brilliant!
Not only can i finally get into Bios Instantly!! But im now using 200x20 = 4Ghz @ 1.3250, from a quick look 208 BLK seems to be the limit, and i cant seem to use speedstep once above 200x18.
Voltages i've messed with is:
Vdroop Enabled | 1.3250v | QPI/vtt 1.30 | Speedstep = OFF
Results:
200x20 = 4Ghz | Uncore 3400mhz
Akasa AK-967 heatsink | Idle = avg. 33 | Load = avg. 69
First Pentium since a PI 166mhz, very happy indeed with this, anyone else got a similar boost from F4 Bios?
(Edit: Just looked back, people mentioning f4k/j bios? i just used the update bios from web program so i've no idea).
Last edited by fiskov; 01-01-2009 at 09:19 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks