Any tips for clocking with HT on? 4Ghz no problem with it off, but blue screens galore with it on using latest OCCT?
Any tips for clocking with HT on? 4Ghz no problem with it off, but blue screens galore with it on using latest OCCT?
A government big enough to give you everything you want, is big enough to take away everything you have.
System Specs: CM Stacker STC-T01 | Asus Z68 V Pro Gen3 (BIOS 3202) | INTEL Core i7 2600K @ 5Ghz | Corsair 8GB DDR3 1600MHz Vengeance Blue RAM | Corsair 750W TX PSU | Geforce GTX 580 - EK-FC580 Watercooled | XSPC Drive Bay Res | XSPC Raystorm CPU Watercooled | Swiftech MCR320-QP | Swiftech MCP655 | 1 x Corsair Force GT 120Gb SSD & 3 x Seagate Barracuda 7200.12 500Gb RAID 0 | X-Fi Titanium Fatal1ty Pro | DELL U2410 (Rev A02) | Windows 7 Ultimate x64
Your bclk is 200 I guess.., and running stresstest with 8cores brings heat.., alot of it..Originally Posted by scaramonga
This is a Wprime 1024.., I ran real temp beside it.., evap starts at idle -38 celcius.., cpu close to -25.., end of run realtemp hits +67 celcius
If I missmount evap just a tiny bit.., its a no go...
Test lowering ur clock and c where it actually pulls it of.., running 1.5 v-core gives 1.488 in my case and that is max what SS handles with heavy load...
Sometimes we might forget that cpu is no Extreme.., its rated at 2.66 ghz folks.., bringing 8 cores at 4.0 (+50%) out of it is one hell of OC...
Last edited by fubarswe; 01-01-2009 at 06:47 PM.
Yeah Scaramonga, I can run 4ghz(4.2ghz with turbo on), but I cannot run with HT on no matter what at this speed. the fastest i can go with HT on is 3.9ghz......At 4.2 I bluescreen within 5 minutes
(New build):MSI Big Bang X-power II with XSPC MB blocks, Core I7 3930k@4.6Ghz with HT on, 3x GTX 480 SLI with EK Waterblocks(for now), X-fi Titanium, Gskill quad kit 16GB 2133mhz, 2x240GB Corsair GT SSD's(raid 0), 3xWD 2TB drives, Silverstone Strider ST1500 Watt, Dell3007WFP and 2x Samsung 305T's. Water loop: EK HF CPU block, XSPC RX480 Rad, Coolgate GC480, Airplex Revolution 420 Rad, 2x DDC 3.25 18W with EK dual top, Caselabs STH10 white with customizations....
Posting Permissions
Reply With Quote
Bookmarks