MMM
Results 1 to 25 of 8711

Thread: The Maximus Formula Thread - Help/OCing/Guide/Rampage conversion

Hybrid View

  1. #1
    Xtreme Member
    Join Date
    Apr 2008
    Location
    Ontario, Canada
    Posts
    155
    Quote Originally Posted by ChaosMinionX View Post
    The whole rack in the case has 2 120mm fans goin across it, the drive is never above 30c...


    Also why does my transfer from drive to drive start out at like 180-200MB/s and drops off to like 20-30MB/s?
    Sounds like an issue with the drive or the cable. Have you tried another cable?
    Board: ASUS P7P55D-E
    CPU: i5 750 @ 4Ghz w/Corsair CWCH70
    RAM: 4x 2GB Corsair Dominator sticks at 1600Mhz
    Video: ASUS ATI Radeon 5870
    Case: Lian Li PC75
    PSU: ANTEC 850W
    Linux: Fedora Core 14 x86_64
    Windows: Windows 7 Pro x64 for the odd game.


  2. #2
    Xtreme Cruncher
    Join Date
    Oct 2006
    Location
    Boston, Massachusetts
    Posts
    2,224
    Quote Originally Posted by OVERK|LL View Post
    Sounds like an issue with the drive or the cable. Have you tried another cable?
    Just used a different cable. Will see how it fairs.

  3. #3
    Registered User
    Join Date
    Nov 2007
    Location
    Some were in Calif. were everything is over priced. :(
    Posts
    57

    E8600 4.0Ghz @ 1.23v/4.4Ghz @ 1.34v stable

    Hello guys,

    Well after the fist post i did in this thread (post #7706), i did some voltage changes at the heart of the board.
    Surprised myself with my findings.

    I thought i would run a couple of tests to see just what voltage it took to make my O/C's stable.
    As you can see from my last post that my voltages were kinda high to start with. But after adjusting most of the settings that count, i ran with it.

    So these 2 tests were done with IntelBurn software, 10 irritations to be sure of stability 2X.
    For each test run, i dropped the voltage to CPU 1 increment until i came up with the correct voltage required for my CPU.(Screen shots provided below)

    Asus Rampage Formula
    Intel E8600

    Voltage as follows:
    CPU ********
    CPU PLL 1.50v
    NB 1.55v
    Dram 2.14v @ 2T
    FSB Term 1.36v
    SB 1.050v
    SB 1.5v Voltage 1.50v
    Load Line Enabled
    All other voltage settings set to auto.

    All the setting above were left alone on these tests, only adjustments i made were to CPU voltage.

    (1.33750v to CPU bios)
    4400mhz x 8 @ 2200FSB, Bus speed 550.0mhz @ 59c load temp.




    (1.24375v to CPU bios)
    4000mhz x 8 @ 2000FSB, Bus speed 500.0mhz @ 50c load temp.
    As you can see i threw the Asus Probe software in there to help with CPU voltage confirmation. Yes it is a bit buggy as well.




    As you can see in the screen shots i managed to get my CPU O/C'd stable with a huge decrease in voltage to CPU.
    A Thank you to Renegade5399 @ BPC for the voltage help
    I hope this will help others in the long run with there o/c's.

    Source thread @ BPC

    Enjoy
    Last edited by lohoutlaw; 12-29-2008 at 06:23 AM. Reason: Added source thread at BPC
    Asus Rampage Formula
    Intel E8600
    Kingston HyperX PC8500 (4gig)
    Corsair 750 Quad BLK PSU
    WD Green 2X500g Raid0 goodness
    XFX 260GTX
    X-Fi Extreme Music
    All tucked in my ThermalTake Full Tower
    Custom water cooling by me

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •