Micron D9 GMH\GKX\JKH etc club

**OC4/3** · 12-26-2008, 12:08 PM

600 CL4 done:

Done with Team Xtreem DDR 2 1066mhz CL5 D9GKX Green PCB(2.7xvdimm

),E8500 E0,IP35 Pro,PL7

Not bad for Christmas?

Everest benchie at this setting:

Some AQ3 action with 590mhz CL4:

Yet to max out

**WaterFlex** · 12-26-2008, 12:31 PM

OC4/3
Well done, mate! But something strange because of I have the same Read and Write speeds but Copy is 10500.
It is so because of Intel need more Mhz and tight timings don`t affect. Nvidia chipset would have done a great job with 600mhz cl4.

**fatguy1992** · 12-26-2008, 06:47 PM

Just checking, its the 3:5 diver that is bugged on P45 mobo's?

**radaja** · 12-26-2008, 08:31 PM

fatguy1992,you are correct 3:5 is the bugged divider on the p45 chipset..

**fatguy1992** · 12-26-2008, 08:44 PM

Just wondering, how can it be bugged? Like WTF did Intel do/not do?

**OC4/3** · 12-26-2008, 08:51 PM

Originally Posted by WaterFlex

OC4/3
Well done, mate! But something strange because of I have the same Read and Write speeds but Copy is 10500.
It is so because of Intel need more Mhz and tight timings don`t affect. Nvidia chipset would have done a great job with 600mhz cl4.

Something to do with my board,for some reason,Abit IP35 Pro always have a lower copy

**radaja** · 12-26-2008, 10:42 PM

fatguy1992,thats a good question. I really dont know why its bugged, but i think i know someone who might just know(cryptik).maybe he has some insight into this issue.

**fatguy1992** · 12-26-2008, 11:13 PM

True, lets hope Cryptik can answer our question

**pangingIII** · 12-27-2008, 12:50 AM

too bad that one is not actual ddr2 speed, actual speed is 411x3 = 1233MHz (instead of 411x3.33 1368MHz), just try it since the memory multi 3.33x still exists in this board's bios.

it's sure like a chipset bug, but i don’t know the technical detail behind this either.
but i think everyone agree, i also think motherboard makers also knows pretty well about this chipset bug.

Originally Posted by WaterFlex

Well done, mate! But something strange because of I have the same Read and Write speeds but Copy is 10500.

WaterFlex, what about the latency results (with default tREF) in your P45 board?

**fatguy1992** · 12-27-2008, 11:21 PM

Could someone have a look at my 24/7 RAM settings and tell me what u think? Also what sub-timings should I change?
I'm wanting 2 keep my vdimm at 2.0v, but I could use 2.1v if I want, cause i have a 133CFM fan blowing on them

.
BTW this is 4GB (4x1GB) of my CellShock PC2-8500 RAM.

I hope u can read the pic, I wish photobuckect would stop making them bad quality

.

**neo mike** · 12-27-2008, 11:35 PM

I would say your timings are fine, you can pass memtest fine ? you might be able to drop you TRFC a tad bit.

**fatguy1992** · 12-28-2008, 12:12 AM

I haven't tried memtest yet. I'll run some stability tests later. Also I got TRFC at 40.

I'v changed over 2 only 2 stick now 2 see what they can do. Atm i'm at 1200MHz 5-5-5-15 @ 2.1v, i'm hoping for 1250MHz, but i'll have 2 change my FSB.

**neo mike** · 12-28-2008, 12:56 AM

You should be able to run all 4 sticks at 1200, maybe higher, i was able to run 4x1 at 1300.

**fatguy1992** · 12-28-2008, 12:58 AM

Originally Posted by neo mike

You should be able to run all 4 sticks at 1200, maybe higher, i was able to run 4x1 at 1300.

I did, but I had to rasie my MCH volts to make it stable, but then i'd have to change my MCH reference and so on and I CBF atm.

**neo mike** · 12-28-2008, 01:07 AM

well im using the ep45t-ud3p, the ddr3 version, i left everthing on auto except mch voltage, cpu voltage, and memory divider and timings, i never even changed mch ref and all that stuff, and i hit 590fsb pretty easy. Sure if i played with the other voltages i could get more, but im just looking for 24/7 stable now. That board you have is a monster overclocker, but that quad will limit you, i would try to get 1200 4x1 stable, to me 2gigs aint enough, at least not in vista thats for sure.

**westsider** · 12-28-2008, 01:46 AM

crucial,cellshock have changed their chips

what else stays ?
i think only Teamgroup

**fatguy1992** · 12-28-2008, 01:47 AM

I only have XP 32-bit

I'll get it stable tomorrow, to tired atm.

**RASTAVIPER** · 12-29-2008, 07:22 AM

Can someone tell me why I can't even boot with my Cellshock Pc8000 5-5-5 with divider 3:8 and stock settings?It should get me an 533 DRAM Frequency.
And to start my machine, I need to clear cmos and select another divider..

**ThatGuy16** · 12-29-2008, 05:34 PM

i just got 4x 1GB Tracers, D9 BL12864AL1065.16FD3

however, i didn't know that the X38 (gigabyte) boards were crap when it come to installing 4x1GB 1066 memory. It won't post at all with all four in, does anyone know a way around this?

All the sticks are good, memtested.

**neo mike** · 12-29-2008, 06:24 PM

You should be able to run all 4 sticks, i was able to run 4 sticks in my p45 gigabyte, did you loosen up the timings alot and try ?

**Ket** · 12-29-2008, 06:29 PM

Well, its taken me some time (too long really) but I'm finally getting a Wolfie. Tomorrow is when I will order one, likely on next day shipping

**ThatGuy16** · 12-29-2008, 06:34 PM

Originally Posted by neo mike

You should be able to run all 4 sticks, i was able to run 4 sticks in my p45 gigabyte, did you loosen up the timings alot and try ?

yeah, i tried. All four sticks are good, the person i bought them from had a EX38-DS4 and had the same problem, but they worked like champs on his X48 rampage.

I'll probably sell them, double sided tracers should be easy to get rid of

I haven't done it, but they all work and the guy said he ran a full pass of memtest..

**Ket** · 12-30-2008, 08:33 AM

CPU has been shipped and arrives tomorrow

Lets hope I can get her to hit 4G without too much discomfort!

**Ket** · 12-31-2008, 02:37 AM

E7200 installed and running. Made in Costa Rica not Malaysia and her badge is SLAPC, not SLAVN. Will report back after letting her settle in with OCCT for half hour.