Good utilization
Good utilization
what fan is that up on the window sill?
careful KELL5, i did that once and got condensation.
Case-Coolermaster Cosmos S
MoBo- ASUS Crosshair IV
Graphics Card-XFX R9 280X [out for RMA] using HD5870
Hard Drive-Kingston 240Gig V300 master Seagate 160Gb slave Seagate 250Gb slave Seagate 500Gb slave Western Digital 500Gb
CPU-AMD FX-8320 5Ghz
RAM 8Gig Corshair c8
Logitech 5.1 Z5500 BOOST22
300Gb of MUSICA!!
Steam ID: alphamonkeywoman
http://www.techpowerup.com/gpuz/933ab/
I run my true's 120mm fans an 18v drill charger for extra rpm. It get's quite warm and I hate heat so I actively cooled it with some paste and an old heatsink. Passive wasn't extreme enough so I added a fanOriginally Posted by roofsniper
Good advice thanks. I have encountered it myself before and so now use a clear vinyl sheeting to create a shroud so all (or any) condensation forms on the outside. The cool air flow from the slightly open window allows the air around the entire rig to remain very cool so I don't usually have to worry unless it hits -5c or lower.
This was last week when we had -9c.
Last edited by KELL5; 12-22-2008 at 10:20 AM.
WOW nice
this looks like a good place to make my first post.
after the new mobo and another s1
CPU:..................AMD Phenom II x4 940BE @ 3.7ghz [201x18.5]@1.472v and growing
COOLER:............Sunbeam core-contact Freezer
MOBO:...............BIOSTAR TA790gx 128m
MEM:.................8GB Gskill pc8500@ 1072mhz [5,5,5,15,23,2t]@2.1v
GPU:..................2x Visiontek Hd4850s Xfire @500/775@1.056V 2D - 810/1100@1.351v 3D +accelero S1
HD:....................250 gig WD hd
HD:....................500 gig WD hd
PSU:...................Antec EA650
CASE..................Antec 900
OS:....................Dual boot Xp64 and Vista64 Ultimate
Welcome to XS
Work and School, Work and School, oi!
I really wished I had some of your talents and making my case clean and tidy. Cable sleeping, cable management etc. My Cm stacker 830 looks so ugly. Want 832!
Btw. How high is a TRUE compared to a Tuniq?
Asus MAXIMUS Formula rev1.03 440x10 - E8600 @ 4.4ghz by Sunbeam Tuniq Tower120
4x1 Crucial Ballistix @ 1123mhz 5-5-5-15 2T
XFX8800GTX @ 615/1500/2100mhz - XFI Xtreme Gamer
4x1 1TB Samsung Spinpoint F1
Enermax Galaxy 1000W
CM Stacker830
22" Samsung SyncMaster 226BW
MS IE 3.0 - Qck Steel - Sennheiser PC165
bling this is not lol.
Cooler Master V8 with 1366 bracket cooling an i7. Topped out at 4ghz @ 200x20 1.34v 83C fully loaded. Not bad for an i7.
This is just after I mounted it.
Happy Holiday's XS!
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
What are those transparent black fans ?A few pictures from my Stacker
^ yeah those look really sweet
"deleted"
sweet looking fans! and quiet
http://xthermal.com/product.php?id=5
I finally took some time to really tidy up my wiring after being jealous of all the fine jobs done around here. It's still not that great, i might cut a whole to run all the cables behind the mobo tray
TT Tsunami Dream
Last edited by Kingcarcas; 12-23-2008 at 08:07 PM.
i3-8100 | GTX 970
Ryzen 5 1600 | RX 580
Assume nothing; Question everything
will it help if i use a weaker fan for push in a push/pull config??
for example
scythe s-flex 110 cfm 25mm for push
scythe ultra kaze 133cfm 38mm for pull
Canon 5D Mark II (Canon 50mm f/1.2L | Canon 135mm f/2L | Canon 24-70mm f/2.8L | Contax Zeiss 85mm f/1.4 | Zuiko 21mm f/3.5 | Crumpler 7MDH | Hitech filters + Lee Foundation Kit | B+W filters)
Hasselblad 201F (Zeiss 80mm f/2.8 CF | 2x A12 Back | Domke F-4AF)
Nikon F3HP (Nikkor 50mm f/1.2 | Nikkor 55mm f/1.2)
Images: Flickr
@Marin
SanAce fans?
Yeah there San Ace's, I so want.
My Rig
CM690|Intel Q6600|Noctua NH-U12P|DFI LP DK P35|G.SKILL 4GB DDR2-1000|EVGA 8800GTS G92|Seagate 250GB|Creative X-Fi Platinum|Corsair 620HX
Yeah, San Ace fans. Got them off PTS before they went out of stock (went out of stock a few days ago).
Canon 5D Mark II (Canon 50mm f/1.2L | Canon 135mm f/2L | Canon 24-70mm f/2.8L | Contax Zeiss 85mm f/1.4 | Zuiko 21mm f/3.5 | Crumpler 7MDH | Hitech filters + Lee Foundation Kit | B+W filters)
Hasselblad 201F (Zeiss 80mm f/2.8 CF | 2x A12 Back | Domke F-4AF)
Nikon F3HP (Nikkor 50mm f/1.2 | Nikkor 55mm f/1.2)
Images: Flickr
will it help if i use a weaker fan for push in a push/pull config??
for example
scythe s-flex 110 cfm 25mm for push
scythe ultra kaze 133cfm 38mm for pull
Could someone please tell me what the big deal is with San Ace fans? I think i saw the specs a while ago and I didn't notice anything special. I must be missing something?
Better motors than the brands aimed at enthusiasts. They are very quiet for the amount of air they can push. Also, like Delta and Panaflo they can last a lot longer than other fans due to the quality. Basically, you get what you pay for
Canon 5D Mark II (Canon 50mm f/1.2L | Canon 135mm f/2L | Canon 24-70mm f/2.8L | Contax Zeiss 85mm f/1.4 | Zuiko 21mm f/3.5 | Crumpler 7MDH | Hitech filters + Lee Foundation Kit | B+W filters)
Hasselblad 201F (Zeiss 80mm f/2.8 CF | 2x A12 Back | Domke F-4AF)
Nikon F3HP (Nikkor 50mm f/1.2 | Nikkor 55mm f/1.2)
Images: Flickr
They got two left.
My Rig
CM690|Intel Q6600|Noctua NH-U12P|DFI LP DK P35|G.SKILL 4GB DDR2-1000|EVGA 8800GTS G92|Seagate 250GB|Creative X-Fi Platinum|Corsair 620HX
Oh wow they're back in stock. To order more or not...They got two left.
Canon 5D Mark II (Canon 50mm f/1.2L | Canon 135mm f/2L | Canon 24-70mm f/2.8L | Contax Zeiss 85mm f/1.4 | Zuiko 21mm f/3.5 | Crumpler 7MDH | Hitech filters + Lee Foundation Kit | B+W filters)
Hasselblad 201F (Zeiss 80mm f/2.8 CF | 2x A12 Back | Domke F-4AF)
Nikon F3HP (Nikkor 50mm f/1.2 | Nikkor 55mm f/1.2)
Images: Flickr
Ok, I like my 220CFM Delta... But I need 2 get a fan controller soon, its way 2 noisy for 24/7.Better motors than the brands aimed at enthusiasts. They are very quiet for the amount of air they can push. Also, like Delta and Panaflo they can last a lot longer than other fans due to the quality. Basically, you get what you pay for
U could get another one for ur TRUE?
Reply With Quote
Bookmarks