Quote Originally Posted by MadDias View Post
i use aod to read out the mb temps. but i also have a thermal sensor of my zalman zm-mfc2 attached to the fins of the heatpipe cooler. that sensor reads 65°C under full load. thatīs only the cooler fins, so maybe the whole mosfet and nb are getting a little hotter.
the voltages for ht and nbcore are at stock. cpu is at 1.4v+2%acc at 3.2ghz.
i can easily put my fingers on every peace of copper (mosfet,nb,sb) on that mainboard, and it's rather cool.
there are 2 possibilities:
1. your phenom is stressing the mosfets/northbridge much more than my x2 5050e or
2. your board is not ok

have you got annother cpu which you test the board with?
and btw, whar are your ambient temps and which case are you using?
mine are about 20-22°C and the board is in a sharkoon rebel 12 with a 25cm fan blowing at it.