Quote Originally Posted by drewhemm View Post
Ok, this issue is really getting on my nerves now so I am asking for assistance...

I know there are many Z7S owners who 'never' reboot their machines - if you are one of these, you can't help me!

For those Z7S owners who do switch their computers off at the end of the day or reboot after a software or driver installation, do you find your BIOS / OC Profile settings are reset and see a prompt asking you to reconfigure BIOS or load default settings?

For me, this is a real problem, firstly the inconvenience of having to go back into the BIOS and reload my OC profile (and frequently I have to repeat this procedure before the BIOS reset prompt goes away), but secondly I occasionally have the need to work remotely and I wake up my PC using Wake On Lan (WOL) and when I am finished I switch it off (I pay my electricity bills!). If I am at a remote location and WOL my machine at it goes to the BIOS reset prompt, it's stuck until I get back to my office. Considering this is supposed to be a enterprise-level board I think this is unacceptable.

I am not sure if this problem is caused by something I have configured in the BIOS but I cannot see what I could have done out of the ordinary. I have overclocked the CPUs, changed the SATA controller to RAID mode, increased vcore to 1.3v, disabled the JMicron external SATA controller and configured a few other basic options. I am wondering if my problem is caused by something I haven't done, such as changing the other voltage settings - I don't know enough about them to want to change them and risk frying something! I also found that disabling quick boot seems to reduce the percentage of times the BIOS is reset, but it doesn't eliminate the problem.

I would ask if you have or have had this problem and have fixed it, please can you share your BIOS settings with me?

A possibly related issue is that I cannot use S3 sleep - or more accurately, I can put my computer to sleep, but when it wakes up, it momentarily shows the logon window and then reboots...typically showing the BIOS reset prompt afterwards...

Compared to my HP xw4300 workstation board that was 100% reliable in terms of BIOS this is a really bad situation to be in.

I have a 650w Antec PurePower Trio PSU and low draw components, so I don't believe power is the problem.

Regards

Andrew
Try the following:
Let it reboot at default values and than shutdown normally. Wait and
startup again than enter the BIOS and than do your settings BUT do NOT set CPU FSB yet (let it on auto) and reboot again, let it startup windows. Than shutdown the last time and reboot and enter the BIOS once again and set the FSB to whatever OC you used.
This works for me! I can shutdown/reboot without having to set the BIOS again.

However as soon as your PC hangs (due to OC or because of windows/software) or reboots (by itself or by the user) before windows is loaded (so before the bios detected all hardware), or when using S3 it starts all over again.

The BIOS is just a PAIN.
But than again maybe this is a hint, you should just leave it on and let it crunch