Quote Originally Posted by Daveburt714 View Post
Hey villa1n, I've really only had a few hours to play with this board so far (busy @ work). I'm running the newest release Bios "080014 11/11/08"

As far as AOD goes, it seems to work OK but has limited adjustments compared to the Asus 79-T and most other boards I've had. The sliders for CPUVid and NBVid act a little strange, if you don't set them to the same Vid they will jump to the lower of the 2. Actually, that is very similar to setting them in BIOS, IE: there is no adjustment for NBVid and setting CPUVid applies the same setting to the NB. If you want to give more juice to just the CPU you need to use the CPU offset voltage. Heres a SS of my best current OC:



This 9850 (0811 BPJW) is pretty weak, so that really isn't too bad considering the short time I've had to play with it....
You have a much newer week so hopefully you'll have a little better luck!

I think the mosfet cooling is a very good call, my wimpy solution seems to be working OK so far.. Well, company just came over so gotta go... I'll post more info later.
Awesome, thanks for the pics. So the CPU offset voltage is a bios setting..and its a number that allows you to add voltage to the cpu.. so for your example you have the VID set at 1.4, does the cpu offst voltage work, like setting it to .05, would make the actual cpu voltage 1.45 while keeping the nb volts at 1.4? Just wanna clarify that hehe so i don't fry my chip :P I think i m gonna end up putting a 9950 in this mobo instead, and use the 9850 in the foxconn. If i can get over 3ghz i ll be happy I should be mucking about with it, either by tommorow or tuesday, so i ll post some results to see what i can get running :P