• QX9650 @ 4.05Ghz stepping l745b (i guess its a good stepping)
• ASUS Striker II Extrem (Bios 1104)
• Noctua NH-U12P
• MSI N280GTX OC
• 2Corsair TWIN3X 2 x 1 Go DDR3 PC12800 7 7 7 20
• WD Raptor 150GB 10k
• 22" Samsung SyncMaster 2253LW Widescreen
• Razer Tarantula,Razer Lanchesis
• X-Fi Supreme FX II
• Thermaltake Toughpower 750W
• Antec Twelve Handred +1 Fan 120 (8 Fans Total with fan proc etc)




BIOS Settings
Extreme Tweaker
CPU Level Up = Auto
Memory Level Up = Auto
AI Overclock Tuner = Manual
CPU Multiplier = 9.0
FSB - Memory Clock Mode = Linked
FSB - Memory Ratio = Sync Mode
FSB (QDR) MHz = 1800
MEM (DDR) MHz = 1800
LDT Frequency = 5x
PCIE Bus Slot 1 & 2 MHz = 100
PCIE Bus Slot 3 MHz = 100
SPP<->MCP Ref Clock, MHz = auto
SLI-Ready Memory = Disabled

Memory Timing Setting
P1 = AUTO
P2 = AUTO
tCL ( CAS Latency ) = 8
tRCD = 8
tRP = 8
tRAS = 24
Command Per Clock (CMD) = 2T
tRRD = auto
tRC = auto
tWR = auto
tWTR = auto
tFAW = auto
tRD = auto
tRTP = auto
tRFC = auto
tREF = auto

Over Voltage
CPU Voltage = 1.40625V
Loadline Calibration = Enabled
CPU PLL Voltage = 1.60V
CPU VTT Voltage = 1.44V
Memory Voltage = 1.80V
NB Core Voltage = 1.40V
SB Core Voltage = 1.50V
CPU GTL REF0 Ratio = auto
CPU GTL REF1 Ratio = auto
CPU GTL REF2 Ratio = auto
CPU GTL REF3 Ratio = auto
NB GTL REF Ratio = Auto
DDR3 CHA1 Ref Volt = DDR3_REF
DDR3 CHB1 Ref Volt = DDR3_REF
DDR3 CHA2 Ref Volt = DDR3_REF
DDR3 CHB2 Ref Volt = DDR3_REF

CPU Configuration
CPU Internal Thermal Control = Disabled
Limit CPUID MaxVal = Disabled
Enhanced C1 (C1E) = Disabled
Execute Disable Bit = Disabled
Virtualization Technology = Disabled
Enhanced Intel SpeedStep(tm) Tech. = Disabled
CPU Core 2 = Enabled
CPU Core 3 = Enabled
CPU Core 4 = Enabled

Spread Spectrum Control
CPU Spread Spectrum = Disabled
PCIE Spread Spectrum = Disabled
MCP PCIE Spread Spectrum = Disabled
SATA Spread Spectrum = Disabled
LDT Spread Spectrum = Disabled


i'm Stable with OCCT 1hours (dosent try more)
soz for my bad english.