Quote Originally Posted by mongoled View Post
Yeah I agree they are distracting me and forcing my hand in settting up a WC loop


I have been looking for info regarding this as I am looking at pushing for 3.2Ghz 24/7 settings with highest clocks on NB/HT etc. At moment rig is prime95 stable for over 13hrs at settings in sig.

Could you tell me how you got to the settings you have in your sig, as I cant walk out what you tweaked to achieve it. The closest I can calculate you clock is as follows

CPU Frequency: 236 HTT x 14 = 3304mhz
NB Frequency: 236 HTT x 10 = 2360mhz
HT Frequency: 236 HTT x 10 = 2360mhz
Mem Frequency: 236 HTT with 800mhx boot strap (i.e. 0.50 ratio) = 472mhz

Ive attached an excel sheet I made regarding Phenom overclocking that I use to calculate the numbers etc, if anyone has the chance can they check this is correct as I am stumped as how you are getting these settings.

Maybe I am missing something big in the bios of my motherboard



Or my maths skills are just terrible



-- EDIT --
Oh and can peeps post there settings in this thread in the format ive put above, if possible

i.e.

CPU Frequency: 236 HTT x 14 = 3304mhz
NB Frequency: 236 HTT x 10 = 2360mhz
HT Frequency: 236 HTT x 10 = 2360mhz
Mem Frequency: 236 HTT with 800mhx boot strap (i.e. 0.50 ratio) = 472mhz
well Im doing

bus speed 264mhz x12.5 =3.3ghz
NB 264x9= 2376
HT same as above
memory frequency 1/2 528mhz

Originally Posted by gOtVoltage
^^^^GameOver^^^^^



Hey ,,TITAN,,your running a 4850x2.. Did you Know that Raising the PCI-E lane watts to 200 will let you Overclock the 4850x2 to its max and keep it stable..

It will also take Stress off the CPU because the 4850x2 uses 290 to 300 watts when clocked or running full tilt..75watts on the Pci-E lane dosnt work good for X2series GX2series or GTX260/280..Ive testted this many time with friends cards that ive tweaked for them.


In the Bios the PCI-E setting Menu to enable Multi graphics Press F4 and #2 and #10 are the PCI-e lanes that are 16x slots ..

Set to AUTONONIMOUS and 16x and 200 for #2 and #10 it may be elen ..All other slots keep on Auto
cant find ay of these settings in my bios