"ASUS P5Q Deluxe discussion".

[x3mgamer]

ok guys heres what ramguy says:


If you only have problems when using all four modules together, then you may be running into a loading issue on the memory controller. The easiest way to resolve this would be to drop the memory frequency to DDR800 to lighten the load on the memory controller. If your problems go away when running four modules at DDR800, then you may need to overclock the motherboard in order to get the system stable at 1066MHz with four modules. In many cases you can set the northbridge voltage up to about 1.5 volts in order to give the board more head room with four modules, however overclocking results can vary, and must be done at your own risk.


so how do i oc the mobo, i lowered the memory to 801 mhz but prime crashes in less than a minute, long before i get any worthy results, what do i need to do to start prime working again without crashing? if i can only make prime stable at 800 mhz i bet blend wouldnt fail anymore and then i could search for stability on 1066 mhz