Cooler Master HAF 932

[mnissan]

cable management is a dream in this case, my zalman zm-mfc2 sports 10 cabels on its own! this is way easier then my old gigabyte triton!

[Edgar0430]

What size rivets do i need for the HAF? I am going to paint the inside of mine when i get it and I want to go down and get get rivets but i dont know what size i need i think they make different size rivets and i dont want to have to get like 2-3 different sizes. Or did someone put the case back together a diff way without rivets?

[[XC] Synthetickiller]

CM Storm : Sniper Case will be the little brother of the HAF ?

Inside they look like a little i think

http://www.hwbox.gr/showthread.php?t=2939

Where can you buy this case? I want it now!

[HuffPCair]

Ugh I keep seeing cooler master cases I like and want to get. First it was the HAF now its the ATCS 840 but that thing looks awesome too.

[Nemon]

My HAF 932 with liquid cooling!


Need ideas to get better hose managment.

Thanks

[R0bert]

You've got i920+GTX260 on one 120mm fan rad? : O How's the temps?
/edited
ah stupid me, didn't noticed the 3 fan in the 'roof' of the case :E

[mondo]

Nemon how much is the clearance between the rad and the mobo?? is it enough for a 38mm fan?? thanks

[flopper]

Got the chassi today.
really nice one.
removed the HD bay to get less restricted aircooling.
I just use 2 HD in supension so its working out for me.
Now, if I get a camera I could post some images.

[DI3S3L]

Same type of question as mondo.

How much room is there between the roof of the case and the motherboard?

I've seen a push/pull setup on a top rad, but I would like to know just how much room there is.

Thanks

[Nemon]

Nemon how much is the clearance between the rad and the mobo?? is it enough for a 38mm fan?? thanks

With my TFC 360 installed there is 55mm, so a push/pull 25mm fans will work.

Also the rad is centered and there is 30mm space from side wall .

[chouchou]

nice clean case Nemon. props on the paint job too!

[mondo]

nemon... thanks for that info... i guess i will be going for 3 38mm thick san aces at the top.... haha.. gotta say... u have a very nice and clean case too... liked the black paint u used... looks nice

[RAND0M1ZER]

Got the chassi today.
really nice one.
removed the HD bay to get less restricted aircooling.
I just use 2 HD in supension so its working out for me.
Now, if I get a camera I could post some images.

how did you remove the hard drive bay? Did you just take out the screw/rivets? Or did you have to cut it? Also does affect the structure of the case?

pictures would be appreciated.

[DeathTyrant]

I've just put all my components into my new HAF 932! My last case was a Lian Li V2000, which may be of higher build quality (well, it just is), the lay-out and features of the HAF 932 blow it away. It is so much easier to work with.

[flopper]

how did you remove the hard drive bay? Did you just take out the screw/rivets? Or did you have to cut it? Also does affect the structure of the case?

pictures would be appreciated.

drilled out the rivets.
Not affecting the structure of the case, if I want I can put the bay back without any issues.

Works well.
I dont own a camera, and sister isnt coming here for photos yet, and she got a nice camera, sigh.

Like the chassi since it allows me to put everything inside it.
Good size and lot of room and cooling.

[RAND0M1ZER]

ok, thanks its good to know you can put it back in too.

[Nemon]

nice clean case Nemon. props on the paint job too!

Thanks, I dint take the case apart, just masked off the edges and painted it.
Its a little scuffed up now after the Wc install but thats ok .

[jdmR]

if any of you guys dont use the black clips for the slot vents, lmk. im looking for some if anyone wants to sell em or get rid of em

[bluewhale1]

drilled out the rivets.
Not affecting the structure of the case, if I want I can put the bay back without any issues.

Works well.
I dont own a camera, and sister isnt coming here for photos yet, and she got a nice camera, sigh.

Like the chassi since it allows me to put everything inside it.
Good size and lot of room and cooling.

Hey Flopper when you put the rivets back in are you using a regular hand rivet tool? Also what size rivets are you going to use to put them back in?

[cbienlein]

should be 1/8" rivets

[flopper]

Inside of the chassi.
I havent got the time or hassle to work the psu cables properly, the 750w extra cables are a lot to move around.
Removed the HD cage.
wanted airflow, and room for pump. I use suspended harddrives which makes them siltent.
Its nice to have all my gear inside the chassi.

[noinimod]

Nemon: Very nice WC setup. It looks really clean, unlike.. many other wc setups i see lol

[MINIz guy]

Dual loops have never been easier!

[karl_eller]

Man, push the tubing onto the top rad properly. It's only half on the barbs and it's making me nervous

Also, TT? *gag*

Eller

[MINIz guy]

The tubes have been put on already

And TT for the useless part of the computer.