** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[radaja]

awesome pangingIII! wasnt sure how much farther i could go at pl8. looks like can go quite a bit further.thanks for your help.pretty happy with this 10k across the board.

[Barry]

A few post back i was saying the I couldn't get my MB running with both sticks of ram.At some point it started to work and i couldnt tell why.While eveything seemed to be working great(3.9 on e7200,I decided to run the vcore on the chip to 1.4,a little high but i wanted it to hit 4.0. Whel it did and i wanted to prime95 it on blend.It stayed stable. I was watching the temp and it got up to 58c so i cecided to stop it,thay can go to 65ish,right?

I shut the computer down because i wanted to lower the vcore. On the restart it started to act up again with the second ram slot.I reset cmos and swaped out the ram sticks.I have left it over night to cool down,basement is 59f now. Anyway it won't start with anything in the second slot,does anyone else had this problem? I;m thinking I need to RMA it.