try this
should work
but before that
u need to find out whats the default vcore voltage for 3.33ghz and whats the set vcore in the bios to achieve the exact same vcore with loadline enabled
once uve done that
do this
cpu configuration.. disable everything except executable bit and multi core
multi 8
fsb 500
strap 333
ram 1600
set 1T 7-7-7-20 tRFC 110 first
disable static read and dynamic write
ai clock booster medium
performance level 8
vcore = as above default vcore for 3.33ghz stock
vdimm = ure rated vdimm for 1600mhz
vtt(fsb) - 1.12
loadline - enable
pll,nb,sb,sb 1.05 - lowest voltage aka 1.51/1.25/1.51/1.05
cpu 0 gtl +40, the rest on auto
nb dram vtt +12.5
dram channel a/b +25
spectrum disable..
run memtest86 test 5 for atleast 20 rounds without any error
keep changing ure vdimm until u get exact
once perfect
reduce the tRFC by steps until u can pass around 20 rounds
and then only run the full memtest86 for a atleast 2 hours - 4 passes
load into windows diagnotic mode
and try running interl burn test for around 50-60 runs.
have fun
btw for 4.25 ghz same setting above except
multi 9
vcore = stock vcore for 3.33ghz +0.1v...so example if 4ghz is 1.25v set then u put 1.35v...
if ure cooling is sufficient u can run inter burn test for 50-60 runs
take note this is for e8600 only.. common trait with all the e8600 i tested




Reply With Quote

Bookmarks