Yes, LLC is enabled.I've tried those settings but no success.Thoght the beeping is gone now, but no POST.
The weird fact is that it happens above 475.With 476 fsb it won't post!Strange!My guess is that there is some setting left in Auto that is changing past 475fsb and is crashing the board, but i'm not seeing whitch one!
Now settings are like this:
Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: TURBO
CPU Clock Ratio ..........................: 8x
Fine CPU Clock Ratio.....................:.0.0
CPU Frequency ...........................: 3.84GHz (480x8.5)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 480Mhz
PCI Express Frequency (Mhz) .........: 100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800mV
PCI Express Clock Drive.................: <<< 900mV
CPU Clock Skew (ps)....................: <<< 0ps
MCH Clock Skew (ps)...................: <<< 0ps
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [333]
System Memory Multiplier ..............: 2.0B
Memory Frequency (Mhz) ..............: 960
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................15
Advanced Timing Control
tRRD...........................................Auto
tWTR..........................................Auto
tWR............................................Auto
tRFC...........................................Auto
tRTP...........................................Auto
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................ Auto
Channel A/B
Static tRead Value.........................:Auto
tRD Phase0 Adjustment...................Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:1.3875
CPU Termination…..... 1.200V*.......: 1.3
CPU PLL…………………....1.500V*.......: 1.57
CPU Reference………....0.760V*.......: Auto
MCH/ICH
MCH Core…………….....1.100V...........: 1.36
MCH Reference….…….0.760V...........; 0.703
MCH/DRAM Ref.…......0.900V...........: Auto
ICH I/O……………….....1.550V............: Auto
ICH Core…………...……1.100V............: Auto
DRAM
DRAM Voltage ……....1.800V............: 2.22V
DRAM Termination .…0.900V............: 1.11V
Channel A Reference 0.900V............: Auto
Channel B Reference 0.900V............: Auto
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: n/a
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled]
Any guess?
Originally Posted by Soft Maniac
Reply With Quote
Bookmarks